JC-KDF Plant lodging resistance tester

1、 Product Introduction
The lodging resistance of crops directly depends on the strength of the stem, and the bending resistance of the stem directly reflects the strength of the stem. As crops grow, stem strength also changes. Three point bending tests were conducted on each internode of the stem during a growth period, and the bending moment, which is a flexural strength index, was measured to obtain the changes in plant stem strength during the growth process. The JC-KDF plant lodging resistance tester measures the stem strength and lodging resistance of crops through accessories such as probes, hooks, and pressure plates.
2、 Product parameters
1. Maximum load: 50N, 500N
2. Resolution: 0.01N; 0.1N
3. Accuracy: ± 0.5%;
4. Power supply: Charging power supply: 220V/AC;
5. Continuous working time of battery: 6-8 hours;
6. Stability: Temperature drift: 0.2uV/℃ (0-60 ℃);
7. Zero drift: ≤ 0.1%/8h/FS;
8. Calibration range: full-scale calibration;
9. Environmental temperature: 0~+60 ℃;
10. Environmental humidity: ≤ 80%;
11. Allowable overload: 150%;
12. Shutdown time setting: 10-90 minutes;
13. Battery capacity display: divided into 3 grids, 2 grids, and 1 grid

Juchuang Environmental Protection provides you with comprehensive technical support and perfect after-sales service! Details consultation:!

1. Maximum load: 50N, 500N
2. Resolution: 0.01N; 0.1N
3. Accuracy: ± 0.5%;
4. Power supply: Charging power supply: 220V/AC;
5. Continuous working time of battery: 6-8 hours;
6. Stability: Temperature drift: 0.2uV/℃ (0-60 ℃);
7. Zero drift: ≤ 0.1%/8h/FS;
8. Calibration range: full-scale calibration;
9. Environmental temperature: 0~+60 ℃;
10. Environmental humidity: ≤ 80%;
11. Allowable overload: 150%;
12. Shutdown time setting: 10-90 minutes;
13. Battery capacity display: divided into 3 grids, 2 grids, and 1 grid