JC-PAR Plant Canopy Measurement Instrument

1、 Product Introduction
The PAR plant canopy analyzer can be widely used in agricultural production and research. To investigate canopy light energy resources, measure light interception in plant canopies, and study the relationship between crop growth and development, yield and quality, and light energy utilization, this instrument is used for measuring and recording photosynthetically active radiation (PAR) in the 400nm-700nm wavelength range. The measurement value is in micromoles per square meter per second (μ mols ㎡/s).
The plant canopy measuring instrument is an integrated design, including a LCD display screen, operation buttons, storage SD card, and measuring probe. The instrument menu is easy to operate, small in size, and convenient to carry. The storage medium is a commonly used SD card in the market, with large storage capacity and convenient data management! There is a reasonable power management plan in terms of power consumption. During the testing process, the instrument automatically enters standby mode according to the actual situation. When needed, press the wake-up button to wake up the screen and observe the actual data. There are two measurement methods: automatic and manual. The minimum interval for automatic measurement is 1 minute, and the maximum number of automatic measurements is 99. Manual measurement can be collected manually according to actual needs.
2、 Product parameters
1. Measurement range: 0-2700 μ mol ㎡/s
2. Resolution: 1 μ mol ㎡/s
3. Response time: 10 μ s
4. Automatic collection interval: 1-99 minutes
5. Automatic collection times: 1-99 times
6. Data storage capacity: 2GB (standard SD card)
7. Total length of the instrument: 75 cm
8. Probe length: 50 cm
9. Number of sensors: 25 (standard)
10. Power supply: 2 No. 5 batteries
3、 Product Features
1. The PAR plant canopy analyzer can be widely used in agricultural production and research. To investigate canopy light energy resources, measure light interception in plant canopies, and study the relationship between crop growth and development, yield and quality, and light energy utilization, this instrument is used for measuring and recording photosynthetically active radiation (PAR) in the 400nm-700nm wavelength range. The measurement value is in micromoles per square meter per second (μ mols ㎡/s).
2. The plant canopy measuring instrument is an integrated design, including a LCD display screen, operation buttons, storage SD card, and measuring probe. The instrument menu is easy to operate, small in size, and convenient to carry. The storage medium is a commonly used SD card in the market, with large storage capacity and convenient data management! There is a reasonable power management plan in terms of power consumption. During the testing process, the instrument automatically enters standby mode according to the actual situation. When needed, press the wake-up button to wake up the screen and observe the actual data. There are two measurement methods: automatic and manual. The minimum interval for automatic measurement is 1 minute, and the maximum number of automatic measurements is 99. Manual measurement can be collected manually according to actual needs.

Juchuang Environmental Protection provides you with comprehensive technical support and perfect after-sales service! Details consultation:!

1. The PAR plant canopy analyzer can be widely used in agricultural production and research. To investigate canopy light energy resources, measure light interception in plant canopies, and study the relationship between crop growth and development, yield and quality, and light energy utilization, this instrument is used for measuring and recording photosynthetically active radiation (PAR) in the 400nm-700nm wavelength range. The measurement value is in micromoles per square meter per second (μ mols ㎡/s).
2. The plant canopy measuring instrument is an integrated design, including a LCD display screen, operation buttons, storage SD card, and measuring probe. The instrument menu is easy to operate, small in size, and convenient to carry. The storage medium is a commonly used SD card in the market, with large storage capacity and convenient data management! There is a reasonable power management plan in terms of power consumption. During the testing process, the instrument automatically enters standby mode according to the actual situation. When needed, press the wake-up button to wake up the screen and observe the actual data. There are two measurement methods: automatic and manual. The minimum interval for automatic measurement is 1 minute, and the maximum number of automatic measurements is 99. Manual measurement can be collected manually according to actual needs.

1. Measurement range: 0-2700 μ mol ㎡/s
2. Resolution: 1 μ mol ㎡/s
3. Response time: 10 μ s
4. Automatic collection interval: 1-99 minutes
5. Automatic collection times: 1-99 times
6. Data storage capacity: 2GB (standard SD card)
7. Total length of the instrument: 75 cm
8. Probe length: 50 cm
9. Number of sensors: 25 (standard)
10. Power supply: 2 No. 5 batteries