JC-TQZ soil sampling drilling rig

1、 Product Introduction

The single person handheld soil sampling drilling rig is a lightweight soil collection drilling rig designed based on reference to large hydraulic, gasoline, and pneumatic drilling rigs. Even inexperienced drilling personnel can operate with simple training. The sampling process is simple and straightforward,One to two people can complete the operation of the device. The entire drilling process does not require adding water, ensuring the quality of the sample obtained (no pollution, no disturbance).
Compared with conventional large drilling rigs, soil sampling drilling rigs are more convenient to carry and operate, and non professionals can easily complete the operation of the equipment. In some project sites with low depth requirements (within 10 meters), relatively complex terrain, and difficult access for large equipment, using this equipment is the best choice.
Compared with traditional hand drills, soil sampling drilling machines drill deeper, have higher sampling efficiency, and obtain undisturbed and compressed soil samples (depending on the terrain). In projects with sampling depths exceeding half a meter and high requirements for soil sample quality (undisturbed, non compressed), using this equipment is the best choice.
2、 Product parameters

1. Sampling depth: 1-10 meters (optional)
2. Vibration frequency: 1300 times/minute
3. Power: 1.6 horsepower (7000rpm)
4. Engine type: Single cylinder two-stroke engine
5. Fuel consumption: not exceeding 0.6L/h
6. Weight: 20.2 kg (main unit)
7. Sample tube specifications: inner and outer diameters not less than 35mm/40mm; Length not less than 1.00 meters per piece
8. Sampling depth, can be connected to a drill rod for one-time sampling without lifting the drill midway
9. Pulling device: Quick pulling, speed not less than 3.00 meters per minute

3、 Product Features

Fast footage, the sample remains in its original state without disturbance!
It can be sampled using the built-in PVC sampling tube or directly!
The ideal depth for sampling conventional soil layers is 1-5 meters, and for soft soil layers it can reach up to 10 meters!
● Hand pulled start, stop trigger button, spring isolated seismic handle!
The puller adopts a more reasonable ergonomic design, which can be pressed by hand or foot!
4、 Standard configuration
One gasoline powered engine, one set of engine tool kit, optional standard soil drill bit and hard soil drill bit, not less than1 meter drill rod 2Root, not less thanTwo 1-meter plastic sample tubes, one scraper, one rubber hammer, one vise, one earphone, one 5M tape measure, one glove, and one cleaning brush, one set of specialized extraction equipment, and one industrial plastic transport box

Juchuang Environmental Protection provides you with comprehensive technical support and perfect after-sales service! Details consultation:/

Product parameters

1. Sampling depth: 1-10 meters (optional)
2. Vibration frequency: 1300 times/minute
3. Power: 1.6 horsepower (7000rpm)
4. Engine type: Single cylinder two-stroke engine
5. Fuel consumption: not exceeding 0.6L/h
6. Weight: 20.2 kg (main unit)
7. Sample tube specifications: inner and outer diameters not less than 35mm/40mm; Length not less than 1.00 meters per piece
8. Sampling depth, can be connected to a drill rod for one-time sampling without lifting the drill midway
9. Pulling device: Quick pulling, speed not less than 3.00 meters per minute

Product Features

Fast footage, the sample remains in its original state without disturbance!
It can be sampled using the built-in PVC sampling tube or directly!
The ideal depth for sampling conventional soil layers is 1-5 meters, and for soft soil layers it can reach up to 10 meters!
● Hand pulled start, stop trigger button, spring isolated seismic handle!
The puller adopts a more reasonable ergonomic design, which can be pressed by hand or foot!