JC-YQ-12 multifunctional composite sampling gun

1、 Product Overview
The multifunctional composite sampling gun is mainly used for collecting hydrogen chloride, sulfuric acid mist, hydrochloric acid mist, and fluoride from fixed pollution source emissions. The sampling gun adopts a full heating method, and the gas passes through the gun body lined with a constant temperature heating PTFE tube, passes through a PTFE film filter, and then passes through an impact absorption bottle to collect solid particle chloride and gas chloride, hydrochloric acid mist, sulfuric acid mist, and fluoride separately. The particulate chloride is collected using a 47mm filter membrane, while gaseous hydrogen chloride, hydrochloric acid mist, sulfuric acid mist, and fluoride are collected using absorption bottles. At the same time, parameters such as flue gas flow rate and temperature can be measured.
2、 Execution standards
GB16157-1996 "Determination of particulate matter and sampling methods for gaseous pollutants in exhaust from fixed sources of pollution"
HJ/T47-1999 Technical Conditions for Smoke Samplers
HJ 549-2016 "Determination of Hydrogen Chloride in Environmental Air and Waste Gas - Ion Chromatography Method"
HJ 544-2016 "Determination of Sulfuric Acid Mist in Waste Gas from Fixed Pollution Sources - Ion Chromatography Method"
HJ/T67-2001 "Determination of Fluoride in Fixed Air Pollution Sources - Ion Selective Electrode Method"
3、 Main features
The gun body is heated at a constant temperature throughout the entire process, and can be adjusted freely within the temperature range of (0-199) degrees
Lined with PTFE tubing and filtered with PTFE membrane filter
The membrane filter adopts one-way valve control, constant temperature heating, and can be adjusted freely within the temperature range of (0-120) degrees
Adopting DC24V heating to ensure the safety of operators
The sampling gun can be placed in an intelligent refrigeration box for ice water mixture, with temperature controlled at (3-5) degrees
Equipped with adjustable height tripod for supporting sampling gun and absorption bottle
Equipped with 4mm, 5mm, 6mm, 8mm, 10mm, 12mm multi specification PTFE sampling nozzles
4、 Product parameters
Working power supply DC24V/10A
Sampling gun heating temperature Adjustable from 0-200 ℃
Sampling tube length 1.5 meters (customizable extension)
Smoke temperature measurement range 0-500 degrees
membrane filter Adjustable from 0-120 ℃
Pitot tube coefficient 0.84
Heating temperature of gun body 0-200 degrees
Membrane filter filtration 0-120 degrees