JC-YQ-16 Oil Fume Particle Sampling Gun

1、 Product Overview
The oil fume particulate matter sampling gun is mainly suitable for the determination of particulate matter in organized emissions from the catering industry. When the standard dry sampling volume is 0.5m3, the detection limit of this standard method is 0.5mg/m3, and the lower limit of determination is 2.0mg/m3. The sampling head (filter membrane+sampling head+filter membrane support net+aluminum foil ring) in this oil fume particulate matter sampling gun can be used for overall weighing, minimizing sampling errors to the greatest extent possible. It can be widely used in the fields of catering, environmental protection, hygiene, labor, safety supervision, military, scientific research, education, etc.
2、 Execution standards
HJ/T48-1999 Technical Conditions for Smoke and Dust Samplers
GB16157-1996 "Determination of particulate matter and sampling methods for gaseous pollutants in exhaust from fixed sources of pollution"
DB13/T 2375-2016 "Determination of Low Concentration Particulate Matter in Fixed Source Exhaust Gas by Weight Method"
DB11/T1485-2017 "Determination of Particulate Matter in the Catering Industry - Manual Weighing Method"
3、 Main features
Stainless steel outer sheath, with scale markings on the gun body to view the size of the extension into the flue
The vertical low concentration sampling head is lightweight, with an overall weight of less than 12g, improving accuracy
Sampling can simultaneously measure smoke flow rate and smoke temperature
Integrated design of S-shaped pitot tube, platinum resistor, and sampling tube, compact structure
The length of the gun body can be customized according to demand
Optional customized titanium material smoke gun, more corrosion-resistant and lightweight
4、 Product parameters
Sampling gun length 0.8 meters
Pitot tube coefficient 0.84
Requirements for measuring hole diameter ≥Ф80 mm
Sampling nozzle diameter 4mm、5mm、6mm、8mm、10mm、12mm
(Pt100) Temperature (0～500)℃
Filter membrane diameter Φ47mm