JC-ZS03 vibrating screen

1、 Product Introduction
A vibrating screen, also known as a vibrating screen machine, is a machine used in conjunction with a test screen for material particle size analysis, replacing manual screening. Widely used for dry and wet screening and filtration of materials in industries such as food, medicine, metallurgy, building materials, chemical, cement, glass, grain, ceramics, and papermaking. It has the advantages of smooth vibration, high excitation force, stable performance, fast network replacement speed, light weight, simple operation, and easy maintenance. The basic principle is to use the heavy hammer (uneven heavy hammer) installed at the upper and lower ends of the motor shaft to transform the motor's rotational motion into horizontal, vertical, and inclined three-dimensional motion, and then transmit this motion to the screen surface. If the phase angle of the upper and lower heavy hammers is changed, the direction of the raw material's movement can be altered.
2、 Product Features
1. Can quickly replace mesh layers without any tools, and can use up to 8 mesh layers;
2. Can be equipped with an automatic control timer, which can be set for 1-60 minutes;
3. Any powder, liquid, or granular material can be used;
4. The sieve powder does not fly, the liquid does not spray randomly, and the particles do not jump;
5. Use a mesh size of 3.5 to 400.
6. Vibration frequency: 1460r/min.
3、 Product operation
1. Before startup:
(1) Check whether the coarse and fine nets are damaged
(2) Is each group of tie rings securely locked
2. At startup:
(1) Pay attention to any abnormal noise
(2) Is the current stable
(3) Is there any abnormality in the vibration
3. After use: Clean the vibrating screen after each use
4. Regular maintenance

Regularly inspect the coarse mesh, fine mesh, and springs for fatigue and damage, and check if any parts of the machine are damaged due to vibration. Parts that require lubrication must be lubricated with oil.

Juchuang Environmental Protection provides you with comprehensive technical support and perfect after-sales service! Details consultation:

1. Can quickly replace mesh layers without any tools, and can use up to 8 mesh layers;
2. Can be equipped with an automatic control timer, which can be set for 1-60 minutes;
3. Any powder, liquid, or granular material can be used;
4. The sieve powder does not fly, the liquid does not spray randomly, and the particles do not jump;
5. Use a mesh size of 3.5 to 400.
6. Vibration frequency: 1460r/min.