JH-2 dual channel intelligent flue gas sampler

NegotiableUpdate on 01/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

1. AC/DC dual-use, built-in lithium battery, continuous operation for more than 20 hours; 2. One machine with multiple uses, can be used for both smoke sampling and atmospheric sampling; 3. Dual sampling, each channel can be single * controlled; 4. Brushless sampling pump, with long lifespan and high reliability; 5. Delay/real-time time, sampling time, interval time, number of cycles, etc. can be set; 6. Automatically calculate the sampling volume of standard conditions, which can be sampled at regular intervals or intervals; 7. Electronic flow sensor, constant current sampling, automatically compensates for flow changes caused by voltage fluctuations and resistance changes; 8. Color identification design for gas pipeline, making it easy and accurate to connect the gas pipeline; 9. A drying cylinder equipped with anti backflow suction function; 10. Automatic constant temperature control of sampling tube, temperature digital display; 11. Power off protection function, automatically resumes sampling when power is cut off and power is restored; 12. Chinese large-sized dot matrix LCD display; 13. Equipped with a heated sampling tube as standard.

Product Details

1、 Product Overview

The JH-2 dual channel intelligent flue gas sampler adopts the solution absorption method to collect harmful gases from flue gas pollution sources. It uses computer, sensor, automatic control and other technologies to greatly improve measurement accuracy, and can detect the temperature and pressure in front of the flowmeter in real time, automatically accumulate sampling volume and standard sampling volume. It can be used by departments such as environmental protection, health, labor, safety supervision, scientific research, and education to determine the emission concentration/total amount of flue gas from various boilers and furnaces, as well as the desulfurization effect of equipment.

The JH-2 dual channel intelligent flue gas sampler adopts the standard HJ/T47-1999 "Technical Conditions for Flue Gas Samplers"; GB/T16157-1996 "Determination of particles and sampling methods for gaseous pollutants in exhaust from stationary sources".

2、 Performance characteristics

1. AC/DC dual-use, built-in lithium battery, continuous operation for more than 20 hours;

2. One machine with multiple uses, can be used for both smoke sampling and atmospheric sampling;

3. Dual sampling, each channel can be single * controlled;

4. Brushless sampling pump, with long lifespan and high reliability;

5. Delay/real-time time, sampling time, interval time, number of cycles, etc. can be set;

6. Automatically calculate the sampling volume of standard conditions, which can be sampled at regular intervals or intervals;

7. Electronic flow sensor, constant current sampling, automatically compensates for flow changes caused by voltage fluctuations and resistance changes;

8. Color identification design for gas pipeline, making it easy and accurate to connect the gas pipeline;

9. A drying cylinder equipped with anti backflow suction function;

10. Automatic constant temperature control of sampling tube, temperature digital display;

11. Power off protection function, automatically resumes sampling when power is cut off and power is restored;

12. Chinese large-sized dot matrix LCD display;

13. Equipped with a heated sampling tube as standard.

3、 Technical parameters

Main parameters	parameter range	resolution	accuracy
sampling flow	（0.5～2.0）L/min	0.01 L/min	Better than ± 2.5%
sampling time	Set freely within 99 hours and 59 minutes	0.1 min	Better than ± 0.2%
Pre measurement pressure	(-30 to +30)kPa	0.01 kPa	Better than ± 2.5%
atmospheric pressure	(70 to 130) kPa	0.01 kPa	Better than ± 2.5%
Sampling volume	9999.99L	0.01L	Better than ± 2.5%
Equidistant sampling time	Set freely within 99 hours and 59 minutes
Equal interval sampling frequency	1 to 99 times
Operating Temperature	(-30～+50)℃
Overall dimensions (W × D × H) mm	240×240×200
Sampler noise	≤59 dB(A)
working power supply	AC220V ± 10%, 50Hz or built-in lithium battery
Total weight	About 2.0Kg
Power consumption	<20W