Jiangxi polypropylene PPH spray tower purification air volume 20000m; /h

Jiangxi polypropylene PPH spray tower purification air volume 20000m ³/h
By means of liquid absorption, chemical reactions, and physical interactions, pollutants in exhaust gases are removed. It is made of polypropylene (PP) material, which has good corrosion resistance and wear resistance, and can effectively cope with the special environment of polypropylene waste gas. Next, let's talk about the advantages, structure, and uses of polypropylene PPH spray tower.

Advantages of Polypropylene PPH Spray Tower

PP spray tower is a commonly used wet waste gas treatment equipment, widely used in industrial fields such as chemical, pharmaceutical, metallurgical, etc., for treating waste gas containing organic matter, acidic substances, particulate matter and other pollutants. Its working principle is based on the principles of mass transfer and contact reaction, which achieves the absorption and removal of pollutants by spraying liquid and fully contacting with exhaust gas.
In the PP spray tower, exhaust gas enters the tower body from the bottom and rises through the packing layer. The function of the packing layer is to increase the gas-liquid contact area, promote the mixing and reaction of exhaust gas and spray liquid. Common filler materials include plastic balls, annular fillers, etc. They have high surface area and good wetting properties, which are conducive to the adsorption and dissolution of pollutants in exhaust gas.
The spray system provides spray liquid inside the tower, evenly spraying it in the form of small droplets onto the packing layer. The spray liquid can be water or a solution containing chemical agents, depending on the composition of the exhaust gas and treatment requirements. When the exhaust gas passes through the packing layer, it comes into contact and reacts with the sprayed liquid, causing pollutants to transfer from the gas phase to the liquid phase, thereby achieving purification effect.
The treated exhaust gas is discharged from the top of the tower, while the waste liquid is collected and treated through a bottom collection system. Waste liquid can undergo subsequent treatment processes such as precipitation, filtration, neutralization, etc. to meet environmental discharge standards.

polypropylenePPH spray towerstructure

Firstly, the packing layer is the core component of the PP spray tower, and its structural characteristics are mainly reflected in the selection and arrangement of packing materials. The packing layer is usually made of corrosion-resistant materials such as polypropylene (PP), and different shapes and types of packing such as annular packing and corrugated packing can be used. The design and arrangement of the packing layer aim to increase the gas-liquid contact area and provide more surface area for the adsorption and mass transfer of pollutants in the exhaust gas. The shape and structure of the packing layer can exhibit characteristics such as porous, staggered, or staggered to enhance the contact effect between the exhaust gas and the spray liquid.

Secondly, the spray system is a key component of the PP spray tower, used to evenly spray the spray liquid onto the packing layer. Sprinkler systems typically consist of components such as nozzles, pipes, pumps, etc. The design and arrangement of the nozzle should ensure that the spray liquid can evenly cover the entire packing layer and form small droplets to increase the contact area with the exhaust gas. The function of a pump is to provide sufficient pressure and flow to allow the spray liquid to circulate and spray continuously. Through the spray system, pollutants in the exhaust gas can undergo physical adsorption, chemical reaction, or dissolution with the spray solution, thereby achieving purification and treatment of the exhaust gas.

In addition, the PP spray tower is equipped with a bottom collection system for collecting and treating pollutants absorbed from the spray liquid and exhaust gas. The bottom collection system usually includes a collection tank, a drainage pipeline, and processing equipment. The collection tank is used to receive the spray liquid dripping down from the packing layer, and the drainage pipeline guides the collected liquid to the processing equipment for further processing or recovery. The design and operational stability of the bottom collection system are crucial for the normal operation of the PP spray tower and the effectiveness of waste gas treatment.

polypropylenePPH spray towerpurpose

PP spray tower, as an air pollution control equipment, has a wide range of application advantages in the industrial field. It has the characteristics of gas purification ability, strong corrosion resistance, easy operation and maintenance, suitable for the treatment of various gases and particles, and flexible adjustment and adaptation to different working conditions. By applying PP spray towers, it is possible to effectively purify exhaust gases, improve air quality, and make positive contributions to protecting the environment and human health.

In summaryJiangxi polypropylene PPH spray tower purification air volume 20000m ³/hIt is a commonly used gas purification equipment that can be used to treat pollutants in polypropylene waste gas.
Easy to operate, no need for complex control systems, reducing equipment maintenance and operating costs. It has the characteristics of gas purification ability, strong corrosion resistance, easy operation and maintenance, suitable for the treatment of various gases and particles, and flexible adjustment and adaptation to different working conditions.