KQ-2 type compression crushing force tester

KQ - 2The compression and crushing strength tester isManual produced by Nanjing Kehuan Analytical Instrument Co., LtdCrush resistanceMeasuring instrument. Precise four digit display, configurable with pressure sensors of various ranges to measure the pressure of various samplesCrush resistanceValue.the instrumentReasonable design of self written programs,Direct reading of intensity values, high accuracy, and small size，usemoreconvenient,It's fertilizers, drugs, catalystsAluminum oxide, coal rodWaiting for sample strength determinationFor the ideal new generation of compressive strength tester.

2、 Main technical specifications:

1 Measurement range：0～99.99N

2 、particle diameter: Diameter<30mm

3 Resolution:0.01N

4 Measurement accuracy:≤±0.5%F.S

5 Power supply voltage220V AC 1W

6. Relative humidity: 85%

7. Environmental temperature: Room temperature~50℃

8. External dimensions:175×250×275mm

Self checking zero calibration functionTurn on the power switch and activate the self check zero calibration function. Instrument display; 0.00N， When the measuring table is on the sample product weight, press the reset button once, and the instrument will display; 0.00N。

One click calibration new function:After prolonged use, the instrument sometimes needs to be standardized and calibrated. Using the previous instrument, the operating procedures are complex and easily misleading. Customers can only return to the factory with specialized boardsCrush resistanceMeasuring instrumentA newly developed program with one click calibration. With just one button press, the calibration is successful, solving problems for customers and welcoming customers to the company.

Over range protection function:Different samples have different ranges, and different ranges are equipped with pressure sensors of different ranges. To prevent customers from measuring beyond the range, an over range protection function (peak beep prompt) is set up to ensure the safety of the pressure sensor.