-
E-mail
K.wu@krohne.com
-
Phone
02133397222
-
Address
9th Floor, Building 1, No. 396 Guilin Road (Puyuan Science and Technology Park), Shanghai (200233)
Product Categories
- guided wave radar
- Cologne quality flowmeter
- Cologne rotor flowmeter
- Cologne electromagnetic flowmeter
- Cologne turbidity sensor
- Cologne PH sensor
- Cologne conductivity sensor
- KROHNE Cologne radar level gauge
- Analysis and measurement system
- Cologne residual chlorine analyzer
- Cologne ultrasonic flowmeter
Cologne Measuring Instruments (Shanghai) Co., Ltd
KROHNE Cologne Inductive Conductivity Sensor Conductivity Meter
NegotiableUpdate on 03/12
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
KROHNE Inductive Conductivity Sensor is an electrode type conductivity sensor powered by a two-wire circuit, suitable for applications in drinking water, industrial or municipal wastewater. Durable sensor, equipped with stainless steel electrodes, integrated temperature sensing element (Pt1000) and standard VP2 connector. Through its standard process connection, it can be directly installed in pipelines or containers. SMARTPAT COND 1200 is a member of the SMARTPAT product family - a built-in integrated transmitter that provides fieldbus communication (HART 7) and current output.
Product Details
SMARTPAT COND 1200KROHNE Cologne Inductive Conductivity SensorIt is an electrode type conductivity sensor powered by a two-wire circuit, suitable for applications in drinking water, industrial or municipal wastewater. Durable sensor, equipped with stainless steel electrodes, integrated temperature sensing element (Pt1000) and standard VP2 connector. Through its standard process connection, it can be directly installed in pipelines or containers. SMARTPAT COND 1200 is a member of the SMARTPAT product family - a built-in integrated transmitter that provides fieldbus communication (HART) ® 7) And current output.
SMARTPAT COND 1200KROHNE Cologne Inductive Conductivity SensorSuitable for applications involving water and wastewater
● Two wire circuit power supply, 4... 20 mA/HART ® 7. Can be directly connected to the process control system
● Process connection: G three-quarters (external thread)
● 0.1…20 mS/cm； Can reach+135 ° C/+275 ° F; 16 bar/232 psi
Equipped with stainless steel electrodes and Pt1000 for temperature compensation
Product Highlights
No need for additional transmitters
● Wide range
● High electrode constant
Durable sensor design with long service life
● Integrated temperature measuring components and standard VP2 connector
Free PACTwareTM FDT/DTM software, supporting convenient offline or online configuration
● Connect to the system via standardized fieldbus (HART) ® 7）
● Multiple installation brackets, easy to install and reliable to operate
