MCP 1.9/3.3 3 * 150+1 * 70+6 * 6 rubber sheathed flexible cable

MCPcableMCPCoal mining machine cableMCPMining rubber sheathed flexible cableMCPMining electricityApplication fields:‌Mainly used in the field of geology and mining,‌Especially in coal mines,‌Provide power and signal transmission for equipment such as coal mining machines.‌

Cable specifications:‌The specific specifications are3core70mm²、‌1core25mm²and4core6mm²The combination,‌This configuration can meet the high-power requirements and complex electrical systems of coal mining machines.‌

Safety standards:‌The cable meets the requirements of the safety mark certificate issued by the Mining Product Safety Mark Center,‌Ensure safe use in high-risk environments such as mining sites.‌

Cable characteristics:‌

The rated voltage is0.66/1.14KV，‌Voltage requirements applicable to mining environments such as coal mines.‌

The long-term allowable operating temperature of the conductor is65℃，‌Adapt to the high temperature environment of the mining site.‌

The bending radius of a cable is equal to the diameter of the wire6Double,‌Ensure that the cable maintains good electrical performance even when bent.‌

type number core number Nominal cross-section（mm2）

MC—0.38/0.66 3+1 16~185

MCP—0.38/0.66 3+1 16~185

MCP—0.66/1.14 3+1 35~185MCP 1.9/3.3 3 * 150+1 * 70+6 * 6 rubber sheathed flexible cable

MCP—0.66/1.14 3+3/3 50~185

MCP—1.9/3.3 3+1 35~185MCP 1.9/3.3 3 * 150+1 * 70+6 * 6 rubber sheathed flexible cable

MCP—1.9/3.3 3+3/3 35~185

Requirements and standards for the production of mining cables:

1Insulation resistance between main cores of cable insulation and between main cores and ground wire,Convert to+20Not less than at ℃100MΩ·km.

2Product standards:GB818.2-1999.

3TheMCType cable,have3The main wire core, one ground wire core, and a set of control units consist of2Core,3Core,4Core and7After the cable is formed, a black chlorinated polyethylene rubber sheath or a black chloroprene rubber sheath is extruded on the outside.

4Conductive wire core: Made of tin plated soft copper wire, its performance meets the requirementsGB/T3956-1997.

5Insulation: AdoptingGB7594.2-1987ChineseXJ-00.Type rubber.

6Core identification: Insulation color separation identification is used, with the main core being red, green, and white. The ground wire is black, and the control wire is numbered.

7Cable formation: Twist in the right direction to form a cable. Central filling core without control unit. Place the ground wire in the center if there is a control unit.

8Sheath: AdoptingGB7594.7-1987ChineseXH-03.Type rubber.

9TheMCThe flame retardant performance of the finished cable meets the requirements ofMT386-1995The requirements.