MIDDG-8000 Fully Automatic High Current Generator

MIDDG-8000 Fully Automatic High Current Generator

Product Introduction

MIDDG-8000 Fully Automatic High Current GeneratorFor low voltage, high current dry-type test transformers. Applicable to frequency50HZThe current boosting and load testing of switches, current transformers or other electrical equipment is a necessary equipment for various industries in electrical debugging that requires high current places. It is applied in power plants, substations, electrical manufacturers, scientific research, laboratories and other units, and belongs to short-term or intermittent working system. This high current generator has the characteristics of small size, light weight, good performance, and easy use and maintenance.
Mainly used for primary busbar protection and calibration of various current transformers, motor protectors, air switches, switchgear, circuit breakers, protection screens, etc.
adopt standards
DL/T 596-2005Preventive Testing Regulations for Power Equipment
GB1094.1-GB1094.6-96Degrees of Protection Provided by Enclosures
GB2900Electrical Terminology and Terminology
GB/T16927.1~2-1997High Voltage Test Technology
GB4793-1984Safety Requirements for Electronic Measuring Instruments
GB191Packaging, Storage and Transportation Marks
GB/T.311-1997Insulation and Coordination of High Voltage Transmission and Transformation Equipment

Other name

Fully automatic high current generator, fully automatic current booster, fully automatic high current testing equipment, intelligent high current testing device

Product features

1The data is displayed on a large LCD screen, with clear and intuitive readings; Full Chinese interface, simple and clear operation, suitable for various application scenarios;
2Light touch button operation, fully digital calibration method, eliminates outdated potentiometer adjustment, extremely convenient for on-site use, and easy to control accuracy;
3Status reminder function, guided operation, can be proficiently operated even without instructions;
4During the experiment, there is a flashing high-voltage symbol displayed on the screen, constantly reminding operators to pay attention to safety;
5The test result display function can automatically determine the test results (pass or fail);
6The test result sound recognition function, when the test passes or fails, the equipment will emit different alarm sounds, and the test personnel can directly recognize the test results from the alarm sounds;
7Pause function, during automatic control, this function can achieve current rise at any point/The pause of the descent process can be flexibly controlled by the testing personnel for the convenience of observing the status of the test sample;
8、 The experimental time can be set arbitrarily,0 ~ 9999Seconds (minutes);
9Automatic timing function, automatic timing display of test results, equipment automatically returns to zero position;
10Manual control mode, similar to traditional electric lift/Decrease method, increase in current/Reduce button control and automatic device judgment/Lower limit, with overcurrent protection and other functions, the entire test process is manually controlled and operated as needed;
11Stop with Stop/Emergency button, can be manually reset;
12Intelligent control of current rise and fall speed, when the current approaches the target current, the rise speed will automatically slow down;
13Communication, optional communication function, combined with our company's professionally designed control software, to achieve remote control and data monitoring. (Optional)

parameter

1Rated capacity (common parameters):3kVA
2Output current one:AC 0～1000A,0～3V
3Output current 2:AC 0～500A，0 ～6V
4Voltage measurement accuracy:1％FS ± 3character
5Accuracy of current measurement:1％FS ± 3character