MIDDG Lightweight High Current Generator

MIDDG Lightweight High Current Generator

Product Introduction

300AThe400AThe500AThe600AThe700AThe800AThe900AThe1000AThe1500AThe2000AThe2500AThe3000AThe4000A定制
A high current generator is an essential equipment in the power and electrical industries that requires high current locations for debugging. It is used in power plants, substations, electrical manufacturing plants, and research institutes, and belongs to short-term or intermittent working systems. It has the characteristics of small size, light weight, and easy use and maintenance. We can customize high current generators for temperature rise and heating tests such as switch circuit breakers, busbars, connectors, and contacts for users. We can also customize three-phase inverters with fine balancing function for customers.

Other name

Lightweight high current generator, ultra lightweight high current generator, miniature high current generator

Product features

MIDDG Lightweight High Current GeneratorCapacity is based on5The design of minute short duration working system, if used for intermittent working system, the flow time should be2.5Minute on, off10Minute cooling, this intermittent test can be cycled according to this pattern.
Capacity:5KVA
Power supply voltageAC220V/50HZ
Output voltage:5V(Parallel)/10V(In series)
Output current:1000A(Parallel)/500A(series connection)
Power input: This is an external AC power supply220VInput, require external power supply current not less than20A
Monitoring input: This is0-5Acurrent input
Current output: Select series parallel connection method, output0-1000Ahigh current
Current display: Newt switch selection1000AThe ammeter displays1000A, choose500AThe ammeter displays500A.
Power switch: This is the power air switch.
Output start: After closing the switch, press the button to start the internal voltage regulator input.
Voltage regulation: Press the output button to adjust the voltage to achieve the desired current.
Operation Manual
1Connect the power input aviation plug line, connect the external power supply to the air switch, and the current should not be less than20AThe external voltage isAC220V.
2Observe whether the voltage regulator is functioning properly0The scale is not available, please manually reset it to zero. Then choose the series parallel connection method as needed, connect the output current line, and toggle the button switch next to the ammeter. If the output is large1000AMove it1000AIf the large output is500A, dial to500A档。
3Close the power switch, press the red output button, and use the voltage adjustment knob to achieve the expected output current value. At this time, the current value can be observed through the high current output meter.
4After the device reaches the current value, maintain it5Please return to zero in minutes, press the output button again, power off the regulator and stop working, wait for the regulator to cool down10I will be working in minutes.
5After the experiment is completed, please disconnect the external power supply first, then remove the instrument testing line, and pay attention to instrument hygiene.