MONSUN/Mengxin Ultra Pure Water Treatment Power Supply

Mengxin DP3000S is a three-phase DC device designed specifically for ultra pure water treatment EDI modules, with high performance and stability. The following is a detailed introduction of the product:

1、 Basic parameters

• model：DP3000S

• Rated output voltage：500VDC

• Rated output current：6ADC

2、 Technical indicators

1. Input power supply voltage: 3-380VAC ± 10%/50Hz, wide range, suitable for different power environments.

2. Output voltage range：DC 0～500V， Meet various load requirements.

3. Output current range：DC 0～6A， Ensure stable output.

4. Input control signal：DC 0～-10VDC， Easy for precise control.

5. Applicable loadEDI, CEDI modules, and other ultrapure water modules are widely used in ultrapure water systems.

6. power consumptionEmpty load of about 10W, energy-saving and environmentally friendly.

7. overload capacity150% rated current, time less than 30 seconds, effectively protecting equipment.

8. Adjust current0~Linear setting, flexible adjustment.

9. overcurrent protectionAdjustable from 80% to 150% to ensure equipment safety.

3、 Functional Features

1. Constant voltage/constant current selectionBy selecting switch S1, it is easy to switch to a constant voltage system or a constant current system to meet the needs of different application scenarios.

2. Soft start, soft stopReduce the impact during power startup and shutdown, protect the load and power supply.

3. overcurrent protectionWhen the peak working current exceeds the set value, the output is automatically cut off to protect the equipment from damage.

4. Remote control and feedbackSupport remote control and feedback functions such as water shortage, water cut-off signal, power start signal, fault alarm signal, etc., to improve the intelligence and automation level of the system.

4、 Installation requirements

1. Installation locationIt should be installed vertically inside the three-dimensional box or on the frame of the machine to facilitate natural circulation of cooling air from bottom to top.

2. Gap requirementsThere should be a 20mm gap between the top and bottom of the device, and a 15mm gap between the heat dissipation plate and the chassis mounting plate to ensure air circulation.

3. Wiring requirementsWiring must be done correctly according to the wiring diagram to ensure good insulation between each wire and the ground.

5、 Usage conditions

1. ambient temperatureEnsure that the equipment operates at a suitable temperature between 0 ℃ and+40 ℃.

2. Storage and transportation temperature-10 ℃ to+85 ℃, suitable for different storage and transportation environments.

3. altitudeLess than 1000 meters (with an increase of 100 meters in altitude and a decrease of 1% in rated value), ensure stable performance of the equipment in high-altitude areas.

6、 Application Fields

Mengxin DP3000S is widely used in many industries such as semiconductor, electronics, medicine, food, power, chemical, metallurgical, papermaking, automotive, petroleum, etc., providing stable and reliable power support for ultra pure water systems.