MVR evaporator for heavy metal wastewater discharge treatment equipment

NegotiableUpdate on 01/09

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The core of the MVR evaporator for heavy metal wastewater discharge treatment equipment is negative pressure distillation technology. Simply put, it "evaporates" water in a low-pressure environment, leaving heavy metals in the concentrated solution. The treatment process is clean and efficient

Product Details

Is it difficult to treat heavy metal wastewater? This MVR evaporator helps you meet standards and save money

The electroplating workshopelectroplating wastewaterThere is chromium and nickel hidden inside, from the metallurgical plantMetallurgical wastewaterCarrying lead and cadmium, from the electronics factoryElectronic industry wastewaterContaining highly toxic copper and palladium - if these heavy metal wastewater are not treated properly, not only will it fail environmental inspections, but the cost of hazardous waste disposal will also be high. But it's different when using the right device,MVR evaporator for heavy metal wastewater discharge treatment equipmentYou can turn these 'toxic waters' into standard water and save a lot of money.

First, let's talk about how difficult it is to deal with these wastewater. Are you also worried?

electroplating wastewaterThe composition is mixed with chromium, nickel, and copper, and traditional treatment involves adding a pile of chemicals. The amount of sludge increases dramatically, and the treatment cost is like running water;
Metallurgical wastewaterIt is both acidic and alkaline, carrying heavy metals such as lead and zinc. If it is not cleaned thoroughly, it may exceed the standard and cause insomnia in the middle of the night;
chemical wastewaterThe arsenic and mercury inside are highly toxic,Wastewater from battery productionLead and cadmium cannot be touched, outsourcing disposal is not only expensive, but also afraid of transportation risks;
even ifMechanical processing wastewaterThe iron and aluminum debris inside,Leather wastewaterThe accumulation of chromium inside is enough to be a headache, not to mention the doubling of water volume during production expansion, which old equipment cannot withstand.

How did this MVR evaporator break down? Relying on "negative pressure evaporation" black technology

MVR evaporator for heavy metal wastewater discharge treatment equipmentThe core of it is negative pressure distillation technology, which simply means "evaporating" water under low pressure environment, leaving heavy metals obediently in the concentrated solution, and the treatment process is clean and efficient:

Any type of wastewater can be gnawed onRegardless of high concentrationelectroplating wastewaterIt still contains acid and alkaliMetallurgical wastewaterEven highly toxic oneschemical wastewaterIt can handle everything. The vacuum pump with stainless steel rotor and nickel plated shell is corrosion-resistant and wear-resistant, and is not afraid of damaging the equipment even with "fierce" wastewater.
Energy saving to save half of electricity billsIt can recover the waste heat from steam and distilled liquid, preheat the incoming wastewater without burning too much energy. Just like handlingElectronic industry wastewaterIt used to take 100 kWh of electricity to evaporate 1 ton of water, but after using it, 50 kWh is enough, saving a lot on electricity bills over the course of a year.
Fully automatic operation without worryingHeating, evaporation, and cleaning are fully automatic, eliminating the need for workers to monitor the dosage and parameters. The integrated dual channel cooling system can also stabilize the steam temperature, even if the composition of the wastewater changes suddenly, the treatment effect is stable. The effluent is clear and meets the standard, and the volume of concentrated liquid is only 10% of the original. The hazardous waste disposal fee is directly reduced by half.

No matter if you handle it in an electroplating factoryelectroplating wastewaterThis equipment can simplify the treatment process for various heavy metal wastewater in the metallurgical, chemical, and electronic industries: there is no need to worry about exceeding environmental standards every day, and there is no need to be overwhelmed by high disposal fees. Adding a module during expansion can keep up with production capacity.

to put it bluntly,MVR evaporator for heavy metal wastewater discharge treatment equipmentNot just a machine, but also a "good helper" to help you calculate your environmental account - the initial investment may seem large, but the saved electricity and hazardous waste costs can be recouped in no time. If you are struggling to sleep due to heavy metal wastewater, you may want to take a look at this device to make "toxic water" treatment worry free and cost-effective.