Manufacturer of lightweight vertical multi-stage centrifugal pump

NegotiableUpdate on 05/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Lightweight vertical multi-stage centrifugal pump manufacturer (hereinafter referred to as the pump) is a non self-priming vertical multi-stage centrifugal pump designed and manufactured by absorbing domestic and foreign * technologies. It adopts standard vertical motors and quick installation mechanical seals, making replacement very convenient. The overcurrent part of the $r $n pump is made of stainless steel (304) material, which is suitable for mildly corrosive media. This product can replace similar foreign products such as CR and CRN. After the product was launched on the market, it was deeply loved by a large number of users due to its high efficiency, energy saving, reliable quality, and wide range of applications.

Product Details

Manufacturer of lightweight vertical multi-stage centrifugal pumpProduct features:

1. By adopting excellent hydraulic models and manufacturing processes, the performance and service life of the pump are greatly improved.
2. Due to the use of mechanical seals made of hard alloy and fluororubber, the reliability of pump operation and the temperature of the conveying medium can be improved.
3. The overcurrent part of the pump is made of stainless steel plate stamped and welded, making the pump suitable for mildly corrosive media.
4. The overall structure is compact, small in size, light in weight, low in noise, energy-saving, and easy to maintain.
5. The inlet and outlet of the pump are located on the same horizontal line as the pump seat and can be directly used in the pipeline.
6. Using standard motors, users can easily equip motors according to their needs.
7. Intelligent protectors can be equipped according to user needs to effectively protect pumps from dry running, phase loss, overload, etc.

Manufacturer of lightweight vertical multi-stage centrifugal pumpWorking conditions:

1. Medium temperature: -15 ℃~+120 ℃.
2. The maximum ambient temperature is+40 ℃.
3. The maximum ambient pressure is 10 bar.
4. The maximum import pressure is limited by the maximum environmental pressure.
5. When the density or viscosity of the conveying medium is greater than that of water, it is necessary to consider using a high-power motor.

conveyed medium

1. A non flammable and explosive medium that is thin, clean, and free of solid particles or fibers.
2. Such as mineral water, softened water, pure water, clear oil, and other light chemical media.
3. The main material of the pump is stainless steel, which can be used to pump mildly corrosive media.

Motor selection

The motor is a fully enclosed, air-cooled two pole standard motor
Protection level: IP55
Insulation level: F
Standard voltage (50Hz): single-phase 220V
Three phase 220V/380V