Manufacturer of specialized filling materials for Bao'er Ring LaXi Ring waste gas and wastewater source

Product Overview:

Bao'er ring packing is a new type of packing that has been improved to address some of the main shortcomings of Raschig rings. It involves opening eight layers of rectangular small windows on the wall of a regular Raschig ring, with the small window blades overlapping at the center of the ring and the upper and lower window positions overlapping each other. The main difference between it and Raschig ring packing is that it has rectangular windows on the side walls, and the window blades of the windows are bent into the center of the ring. Due to the opening of the ring wall, the distribution performance of gas and liquid is greatly improved compared to Raschig ring, especially the inner surface area of the ring can be fully utilized.

Product Features:

Ball ring packing has the advantages of high flux, low resistance, high separation efficiency, and high operational flexibility. Under the same pressure reduction, the processing capacity can be more than 50% larger than that of Rascal ring. At the same processing capacity, pressure reduction can be reduced by half, and mass transfer efficiency can be improved by about 20%. Compared with Raschig ring, this type of packing has the characteristics of high production capacity, strong resistance, and high operational flexibility. In general, when the pressure drop is the same, it can be processed 50% -99% higher than Raschig ring, and 50% -70% lower than Raschig ring when processed. The tower height can also be reduced, and using Ball ring can save 20% -40% of packing volume compared to Raschig ring.

Scope of application:

Suitable for use as contact packing in carbon dioxide degassing towers, ozone contact reaction towers, and other reaction towers.

Performance parameters:

Specification (mm) Actual size Outer diameter x height x thickness (mm) Specific surface area Square/cubic Porosity Stacked quantity

/Cube stacking weight

Kilogram/cubic meter

Φ16 16×16×1.0 194 0.911 111840 131

Φ25 25×25×1.2 155 0.87 53500 86.5

Φ38 38×38×1.2 112 0.89 15800 63.5

Φ50 50×50×1.5 73.2 0.901 6500 46.3

Φ76 76×76×2.0 67 0.92 1972 42

Ordering Notice:

Ordering requires specifying the specifications, types, quantities, or cubic meters of the required fillers.

Pall ring

Metal Ball Ring Filler is developed by BASF in Germany, which is made by punching metal sheets and has two rows of window holes with inward extending tongue blades on the ring wall. Each row of windows has five blades, each blade bending inward towards the ring and pointing towards the center of the ring, almost forming a tower at the center. The positions of the upper and lower layers of windows are offset from each other, and the total area of the openings is generally about 35% of the entire ring wall area, allowing gases and liquids inside the tower to freely pass through the windows. Currently, the Ball ring packing is still one of the main annular packing materials used