Manufacturer's quotation for fully automatic oil separation lifting equipment

Manufacturer's quotation for fully automatic oil separation lifting equipmentKey points for use

Regular inspection: During use, the operating status of the equipment should be regularly checked, including parameters such as liquid level and temperature. At the same time, check the equipment for any abnormal sounds, vibrations, or odors, as well as any damage or rust on the surface of the equipment.

Maintenance: Regularly clean components such as filters and sedimentation tanks to avoid blockages that may cause equipment performance degradation. When cleaning, follow the instructions in the equipment manual and use appropriate tools and cleaning agents.

Safe operation: When using the equipment, attention should be paid to safe operation procedures. If it is necessary to inspect or repair equipment, the power should be cut off first and carried out under the guidance of professional personnel.

Troubleshooting: When equipment malfunctions, the problem should be promptly resolved. In case of complex malfunctions or major equipment repairs, professional technicians should be contacted for handling to avoid non professionals dismantling or repairing the equipment on their own.

Manufacturer's quotation for fully automatic oil separation lifting equipmentStructure description:

1) It has a 360 degree automatic cleaning function for the grille. Automatically collect the slag into the slag collection bucket; Automatic control of electric grille, starting automatically when water enters and closing automatically when there is no water, reducing operating energy consumption and saving operating costs;

2) The multi-directional oil control device can separate oil and water twice, slow down the water flow rate and growth time, and guide the waste oil to the oil accumulation area, improving oil separation efficiency and facilitating the control of waste oil collection;

3) The electric grille automatic cleaning and sedimentation funnel structure are used simultaneously to ensure that no debris enters the area;

4) Adopting a modular structure for easier installation and higher oil separation efficiency;

5) Air flotation (optional): Adopting dissolved air flotation technology, the membrane is made of imported rubber EPDM, and the opening is made of German imported CNC knife. The aeration bubbles are small and the gas-liquid contact area is large; When the aerator is in operation, it uses four aeration heads for oxygen filling and aeration, ensuring even diffusion of bubbles without causing pore blockage and strong corrosion resistance;

6) Air flotation pump (optional): The suction port of the gas-liquid mixing pump can use negative pressure to suck in gas, so there is no need to use an air compressor and atmospheric injector. The high-speed rotating pump impeller mixes and stirs the liquid and gas, so there is no need for a stirrer or mixer. Due to the pressurized mixing inside the pump, the gas and liquid are fully dissolved, and the dissolution efficiency can reach 80-100%. So there is no need for large pressurized gas tanks or expensive reaction towers to produce highly soluble solutions. A gas-liquid mixing pump can perform gas-liquid suction, mixing, dissolution, and directly deliver highly dissolved liquid to the point of use. Therefore, the use of gas-liquid mixing pumps can improve the efficiency of dissolved gas-liquid production, simplify the production equipment, and save space.