-
E-mail
sales@szzqhb.com
-
Phone
13301540120
-
Address
Dream Display Industrial Park, No. 19 Taihong Road, Kunshan High tech Zone
Product Categories
Suzhou Zhanqing Environmental Protection Technology Co., Ltd
Manufacturer supplies liquid wastewater with high fluoride content as a defluorination agent for wastewater treatment
NegotiableUpdate on 05/01
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The manufacturer supplies liquid wastewater high fluoride wastewater treatment defluorination agent $r $nFC-2. The high-efficiency defluorination agent is a liquid chemical developed specifically to solve the problem of low concentration fluorine-containing wastewater. It is suitable for the treatment of fluoride exceeding standards in various industries, focusing on the deep treatment stage. The effluent is stable and meets the standard below 1mg/L. It is widely used in industries such as coal chemical, mine wastewater, circulating cooling water, electronics, photovoltaics, electroplating (anodizing, etc.), and glass.
Product Details
Manufacturer supplies liquid wastewater with high fluoride content as a defluorination agent for wastewater treatment
Product Introduction
FC-2 high-efficiency defluoriner is a liquid agent specially developed to solve the problem of low concentration fluorine-containing wastewater. It is suitable for the treatment of fluoride exceeding standards in various industries, focusing on the deep treatment stage. The effluent is stable and meets the standard below 1mg/L. It is widely used in industries such as coal chemical industry, mine wastewater, circulating cooling water, electronics, photovoltaics, electroplating (anodizing, etc.), and glass.
Product Features
|
ØEfficient defluorination Stable compliance with fluoride containing wastewater standards for different industriesBelow 1mg/L ØSimple and quick No need for complicated adsorption process, the defluorination reaction only requires10-15min ØLow cost of use Compared to market technology/Product usage and sludge volume are both 10-20% less ØExtremely low hardness The product is specially designed to not block or scale, and can be adapted to zero discharge systems |
|
product metrics
project |
indicator |
|
General indicators |
appearance |
Brown solution |
effectivecontent/% |
≥32 |
|
pHvalue |
1.5~2.5 |
|
Density（20℃，g/cm3） |
1.2~1.3 |
|
Mass fraction of water-insoluble substances |
≤0.3 |
|
Biosafety indicators |
Arsenic（As）Quality score/% |
≤0.0002 |
Chromium（Cr）Quality score/% |
≤0.001 |
|
Cadmium（Cd）Quality score/% |
≤0.0002 |
|
Lead（Pb）Quality score/% |
≤0.001 |
|
Mercury（Hg）Quality score/% |
≤0.00001 |
Instructions for use
(one)a small test:
1. Detecting fluoride content in wastewater;
原水氟含量 |
dosage(Raw water quantity1L) |
≤5mg/L |
Fluorine content: defluoriner=1mg/L：0.15mLCalculate usage |
5mg/L＜F≤20mg/L |
Fluorine content: defluoriner=1mg/L：0.25mLCalculate usage |
2.
Add liquidFC-2efficientDefluoridation agent (The following dosage can reduce fluoride to1mg/Lbelow)；
3. Stir reaction 10 minute;
4. Adjust with acid or alkali pHValue to6-7；
5. Add a certain amount1‰ of anionsPAMClear separation of mud and water, settling;
6. Detect the fluoride content in the supernatant.
(two)on-site use：
1. Determine the dosage based on the trial results;
2. When treating wastewater on site, add according to the plan provided by our company.
Packaging, Storage, and Precautions
1. 30T tank truck transportation;
2. This product should be stored in a dry, cool, and well ventilated place；
3. productExhibiting acidity(containing a small amount of chloride ions), storage tanks, dosing buckets, pumps, pipelines, etc. should be corrosion-resistant；OptionalPlastic, resin materials, etc. or undergo anti-corrosion treatment.
4. When using, rubber protective gloves should be worn,Wear a filter type protective mask and protective clothing.
Manufacturer supplies liquid wastewater with high fluoride content as a defluorination agent for wastewater treatment
Similar Product Recommend
