Mechanical plate and frame filter press shipped from Weifang

Mechanical plate and frame filter press shipped from WeifangPerformance Characteristics

High filtration accuracy: The filter cloth aperture can be precisely controlled, effectively intercepting micron sized particles, the filtrate is clear and transparent, and the solid recovery rate is high.

Strong adaptability: It can handle high concentration, high viscosity, corrosive or fine particle materials, and can meet different working conditions by changing the filter cloth material (such as polyester, nylon, polypropylene) and filter plate material (such as stainless steel, polypropylene).

High solid content of filter cake: High pressure pressing significantly reduces the moisture content of the filter cake, reducing subsequent drying costs. In some scenarios, the filter cake can be directly used for resource recovery.

Flexible operation: Supports intermittent operation, and can adjust the compression pressure, filtration time, and washing method according to the characteristics of the material to optimize the separation effect.

Easy maintenance: The core components have a long lifespan, the filter cloth is easy to replace, the mechanical clamping system has a low failure rate, and daily maintenance mainly focuses on cleaning the filter plate and checking the sealing.

Mechanical plate and frame filter press shipped from WeifangOperating procedures:

1. The number of filter plates placed on all specifications of filter presses must not be less than the number specified on the nameplate, and the clamping pressure, feeding pressure, pressing pressure, and feeding temperature must not exceed the range specified in the instruction manual. If the filter cloth is damaged, the hydraulic oil should be replaced in a timely manner. Generally, hydraulic oil should be replaced every six months in general environments, and in dusty environments, all hydraulic components such as oil cylinders and tanks should be replaced and cleaned every 1-3 months.

2. The transmission parts of the mechanical filter press, such as the screw rod, nut, bearing, shaft chamber, and hydraulic mechanical pulley shaft, should be filled with liquid lubricating oil 2-3 times per shift. It is strictly prohibited to apply dry calcium based grease lubricating oil on the screw rod, restart the clamping action under compression, and adjust the parameters of the current relay arbitrarily.

3. During the operation of the hydraulic filter press, personnel are prohibited from staying or passing behind the oil cylinder. When pressing or retracting, someone must be present to supervise the operation. All hydraulic components must not be adjusted arbitrarily to prevent equipment damage or personal safety caused by pressure loss of control.

4. The sealing surface of the filter plate must be clean and wrinkle free. The filter plate should be perpendicular and neat to the main beam, and should not be biased forward or backward on one side. Otherwise, the clamping action cannot be initiated. It is strictly prohibited to insert the head and limbs between the filter plates during the process of pulling and unloading slag. The air inside the oil cylinder must be completely expelled.

5. All filter plate feeding ports must be cleaned thoroughly to avoid blockage and damage to the filter plates during use. The filter cloth should be cleaned in a timely manner.

6. The electrical control box should be kept dry, and all electrical appliances should not be rinsed with water. The filter press must have a grounding wire to prevent short circuits and electrical leakage.