Meixu Measurement and Control - Resistance Rotary Level Switch

NegotiableUpdate on 03/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The principle of using the Meixu Measurement and Control Resistance Rotary Level Switch is very simple. The resistance rotary level gauge is usually installed at the top, middle or bottom of the silo wall. When the level is normal (without a level signal), the synchronous motor rotates the blade at the speed of IRPM. When the blade is blocked by the material and cannot rotate, the synchronous motor will stop rotating and drive the micro switch to change the current indication state (indicating alarm or control). At the same time, this switch can be equipped with an explosion-proof casing.

Product Details

1. Selection of technical specifications:Meixu Measurement and Control - Resistance Rotary Level Switch

Model Description:	MX-WW-144-09
Length selection:	standard length168MM，200MM，250MM，300MMwait
Supply voltage:	220VAC（E1）；24VDC（E2）；110VAC（E3）； frequency50/60Hz
Contact capacity：	SPDT 220VAC/5A 250VAC ： 220VAC/3A 250VAC
Operating Temperature：	standard-20～85°（W1）； medium-high temperature-20～200°（W2）；
Blade speed：	1RPM
Output signal:	standardTwo sets of normally open and normally closed contacts（AC/220V/5A,DC/24V/10A）
Torque situation:	30~100Kg*cm
Installation method:	Threaded installationM20、G1/2, G1 and other threads are optional; flange connectionDN25、DN32, DN50 and other flanges are optional
Explosion-proof rating	flameproofExdⅡCT6Gb
Electrical connection:	M20*1.5electrical interface
Probe material:	304 stainless steel（code name30A）；316L stainless steel（code name30B）
Protection level:	IP65

2. Selection guide:Meixu Measurement and Control - Resistance Rotary Level Switch

model	insertion depth	power supply	Operating Temperature	Installation method	Probe rod material
MX-WW-144-09	168MM	220VAC	-20～85°	G1/2	304 stainless steel
Example of ordering:MX-WW-144-09-168MM-E1-W1-G1/2-30A