MicroTOL online turbidity meter

Micro TOL online turbidity meter is mainly used in fields such as river water, tap water, drinking water, pure water, and ultrapure water.

Micro TOL online turbidity meter is mainly used in fields such as river water, tap water, drinking water, pure water, and ultrapure water.

Can provide white light source type or infrared light source type
Quick and easy calibration
A smaller sampling pool reduces calibration costs and provides response speed
Automatic continuous ultrasonic cleaning extends the cleaning cycle
• Simple modular design

Micro TOL online turbidity meter parameters:

Measurement principle:

90°WLScattered light method

The measurement adopts the standardized 90 ° scattered light method in accordance with USEPA180.1.

The turbidity of the medium is determined by the intensity of scattered light. The white light beam is scattered by solid particles in the medium, and the scattered light is detected by a scattered light detection unit arranged at a 90 ° angle to the white light source.

90°NIRScattered light method

The measurement adopts the standardized 90 ° scattered light method in accordance with ISO7027/EN27027. The turbidity of the medium is determined by the intensity of scattered light. Near infrared light of a certain wavelength is scattered by solid particles in the medium, and scattered light is detected by a scattered light detection unit arranged at a 90 ° angle to the infrared light source.

function

IROr white light measurement

Infrared type can be selected to meet the design standards of ISO7027 and DIN27027. The white light type meets the design standards of USEPA180.1 for turbidity measurement. Both models have long-lasting light sources.

BacklightLCD

Backlit LCD ensures clear display in dark conditions. Backlight is suitable for continuous operation. The brightness can be adjusted in the menu.

Water vapor elimination

MicroTOL is equipped with a continuous water vapor elimination system. The replaceable drying bag is installed under the instrument panel for drying the air. The system heat is used to heat the air, and the fan inside the instrument circulates the heated air around the sample cell, eliminating the process of drying the sample cell.

call the police

Provide 2 independent, programmable alarm relays.

ultrasonic cleaning

This option is used for continuous cleaning of the sample tank. It cannot completely replace manual cleaning, but this system will greatly extend the cleaning cycle. Attention: The system requires the use of a special sample pool.

correct

The optional calibration kit is a completely sealed test tube, similar to laboratory calibration steps. This dry calibration method is very fast, clean, and reusable. The menu on the screen will guide you to quickly and easily calibrate.

Technical parameters:

measuring range	0 – 1000.0 NTU 0 – 100 NTU
measuring principle	90 degree scattered light
accuracy	± 2% reading or ± 0.02 NTU, whichever is greater (less than 40 NTU) ± 5% reading (greater than 40 NTU)
resolution	0.0001 NTU (less than 10 NTU) optional
reaction time	5-500 seconds, adjustable
display	Multi line LCD backlit display
light source	White light -7-year lifespan Infrared light -10-year lifespan
call the police	2 programmable relays, 120-240VAC/2A
Analog Output	4-20mA power supply, 600 Ω maximum load
Port	Bidirectional RS-485, Modbus option (optional)
Maximum water pressure	Built in pressure regulating valve, maximum pressure is 1380KPa
velocity of flow	100 milliliters/minute to 1 liter/minute
Sample temperature range	+1 ～ +50℃
Liquid bonding material	Nylon, silicate glass, silicone, polypropylene, stainless steel
power supply	Double layer insulation, anti pollution level 2, overvoltage protection class II
environmental condition	Not recommended for outdoor use, with a maximum altitude of 2000 meters and a maximum humidity of 95% RH (non condensing)
degrees of protection provided by enclosure	IP66/NEMA 4X
Certification and Rules	White light type complies with U.S. EPA 180.1 Infrared type complies with ISO 7027 CE certification, ETL UL61010B-1，ETLc CSA 22.2 No. 101-1-92
External dimensions	35 cm x 30 cm x 30 cm
Transport weight	2.5Kg

Ordering information:

order No	model	light source	range	RS485	MODBUS	self-cleaning
20053	Micro TOL2	white light	0-1000 NTU	have	select	not have
20054	Micro TOL2	Red light	0-1000 NTU	have	select	not have
20055	Micro TOL3	white light	0-100 NTU	have	select	have
20056	Micro TOL3	Red light	0-100 NTU	have	select	have
20063	Micro TOL4	white light	0-1000 NTU	have	select	have
20064	Micro TOL4	Red light	0-1000 NTU	have	select	have