-
E-mail
nyhbjxgs@163.com
-
Phone
13803828288
-
Address
Tengfei Road, Xiaoyi Street, Gongyi City, Henan Province
Product Categories
- Mining Drying Machine Series
- Industrial Drying Machine Series
- Slag Drying Machine Series
- Coal slurry drying supporting equipment
- Heat source and combustion equipment
- Sludge dryer series
- Tearing and crushing equipment
- Coal drying machine series
- Incoming and outgoing materials, conveying equipment
- Forming and granulation equipment
Henan Nanyang Environmental Protection Machinery Co., Ltd
Mineral mud dryer
NegotiableUpdate on 02/12
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Product Introduction Mineral Mud Drying Machine Mineral mud is a type of solid waste in the mining industry
Product Details
Product Introduction
Mineral mud dryer
Mineral mud is a type of solid waste produced in the mining industry. The tailings waste generated during water beneficiation or washing operations is often discharged in the form of slurry. After sedimentation, the wastewater is reused, and the sediment is called mineral slurry. Generally refers to mineral particles smaller than 5-10 microns. Mud can be divided into two types based on its source: secondary mud produced during the grinding and crushing process of ore; The mineral mud generated within the deposit due to geological processes is called primary mineral mud. The more mud there is, the greater the harmful impact on flotation. The fundamental solution is to prevent the generation of secondary mud as much as possible. Mineral mud can still be refined after drying, so effective recycling and utilization of mineral mud is an effective way for mineral processing enterprises to increase economic benefits.
Equipment structure
Mineral mud dryerMain components: feeding equipment, dryer equipment, transmission device, induced draft equipment, discharge equipment, electrical equipment.
working principle
Working principle of mineral mud dryer: The rotary drum of the mineral mud dryer is a slightly inclined and rotatable cylindrical body. Wet materials enter from the upper part of one end, and dry materials are collected from the lower part of the other end. Hot air enters from the feeding or discharging end and is discharged from the upper part of the other end. The cylinder is equipped with a forward copying plate, which continuously picks up and sprinkles the material during the rotation of the cylinder, allowing it to fully contact with the hot air flow to improve drying efficiency and move the material forward. The heat source for drying materials is generally hot air, high-temperature flue gas, etc. Specific selection can be made based on the properties and quality requirements of the material.
Scan the code for more excitement
