Model of heat meter

To further improve the information response speed of iron concentrate grades, IED-4 fluorescence analyzer and IED-2P XRF rapid analyzer have been introduced successively. Using this instrument to analyze iron content only takes 2 minutes, while measuring the content of silicon, sulfur, and potassium takes 6 minutes. Compared with chemical analysis, it significantly accelerates the analysis speed and more effectively stabilizes the grade of iron concentrate and controls impurity content. Strengthening the response of quality information is also reflected in the daily morning scheduling meeting, which requires the workshop to report on the quality of iron concentrate and process quality, as well as the production skills and methods adopted. The factory summarizes the quality of the previous day and puts forward requirements for the quality of the day.

LUGB-MIKVortex flowmeter is a type of flowmeter that applies the Karman vortex principle, used to measure the flow rates of liquids, gases, and vapors, as well as turbid liquids containing small particles and impurities. It is widely used in petroleum, chemical, pharmaceutical, papermaking, metallurgy, power, and other industriesEnvironmental protection, food and other industries.

Some specific structures of the heat meter model have extremely significant characteristics, such as typical pearlite having layered (or fingerprint like) features, which can be easily identified as pearlite; The feather like substance is upper bainite. The white block like material is either ferrite or austenite, while the needle like material is either martensite or lower bainite, and so on. Observe whether the tissue is in the form of flakes, needles, blocks, granules, strips, networks, or any other shape. We also need to carefully observe whether it is a single phase or a composite phase. In observation, attention should be paid to the degree of etching of the sample. Only reasonable etching can correctly reveal various tissues. At the same time, sample preparation is also crucial, as incorrect sample preparation may lead to incorrect judgment of the composition.

·High strength piezoelectric crystal, integrally formed, impact resistant

·Compatible with liquid, gas, thermal oil, and steam metering

·Sonic nozzle calibration, high repeatability, high measurement accuracy

·Temperature compensation and pressure temperature can be freely selected to meet more on-site needs

·The circuit board is aged and operated before leaving the factory, and the entire meter is calibrated one by one, which is more suitable for on-site use

·The sensing head has anti vibration and anti-interference packaging technology, with stronger on-site anti-interference ability