-
E-mail
info@leogroup.cn
-
Phone
13112345678
- Address
Product Categories
Leo Group Co., Ltd
NDX single-stage end suction cantilever horizontal centrifugal pump
NegotiableUpdate on 02/15
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
NDX single-stage end suction cantilever horizontal centrifugal pump product execution standard: DIN24255NDX pump is a high-efficiency and energy-saving new generation horizontal single-stage mite suction centrifugal pump product developed by our company based on the original IS and H-type horizontal end suction centrifugal pumps. Performance range Flow rate: 5-1650m ³/h Head: 5-135m Supporting power: 0.55-250kw Caliber: 32-300m Application scenarios in factories and mines .....
Product Details
NDX single-stage end suction cantilever horizontal centrifugal pump
Product execution standard: DIN24255 NDX pump is a high-efficiency and energy-saving new generation horizontal single-stage mite suction centrifugal pump product developed by our company based on the original IS and H-type horizontal end stage centrifugal pumps. Performance range Flow rate: 5-1650m ³/h Head: 5-135m Supporting power: 0.55-250kw Caliber: 32-300m
Usage scenarios
Factories, mines, urban water supply and drainage, HVAC, industrial softened water, and farmland irrigation.
It is widely used in industries such as factories, mines, urban water supply and drainage, HVAC, industrial softened water, and agricultural irrigation for transporting clean water and liquids with physical and chemical properties similar to water that do not contain round particles. It can also be used for urban fire stabilization and fire water supply systems.
Pumps of the same specification can achieve changes in performance parameters by cutting the outer diameter of the impeller; The conventional speed of the pump is 1450RPM and 20ORPM. If it is necessary to operate at a maximum speed of 355ORPM, our company will provide technical guidance for changing the outer diameter of the impeller under BOHz7 power supply or with steam and diesel engines.
The NDX pump has a simple structure. Reliable performance, small size, light weight, high efficiency, good anti cavitation performance, low power consumption, and easy use and maintenance.
The pump is suitable for conveying media with a temperature range of -10 to 85C and a working pressure of 1.0MPa. If it needs to be increased to 1.6MPa or higher, please specify when selecting and ordering.
