NE9282B Vibration Calibration Platform

NegotiableUpdate on 03/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The NE9282B vibration verification table has adjustable vertical and horizontal support legs for its chassis. When the calibration table cannot be placed smoothly due to uneven desktop or other reasons, adjusting the height of the fixed support legs can keep the calibration table stable.

Product Details

　　NE9282B Vibration Calibration PlatformTechnical Indicators:

1. Power input: 220V, 50Hz, high power consumption of 80W

2. Frequency: commonly used 20, 40, 80, 160, 200Hz, etc. Frequency accuracy: ± 0.01%. And any given frequency within 20-200Hz. (Standard configuration 20-200Hz, other customized)

3. Unit: Acceleration: m/s2 (PK peak value) Velocity: mm/s (RMS effective value) Displacement: um (PK-PK peak value)

4. Amplitude accuracy: Universal type within 20-200Hz

Acceleration: 20Hz~200Hz ± 5%. Speed: 20Hz~200Hz ± 5%.

Displacement: 20Hz to 200Hz ± 5%.

5. System accuracy: High acceleration: 60m/s2 PK; High speed: 150mm/s-R; Large displacement: 1mm

Measurement accuracy: Acceleration: ± 0.3m/s2; Speed: ± 0.3mm/s; Displacement: ± 3um

Signal input: AC: 0-1V (RMS) Accuracy: ± 10mV;

6. Sensor input: Large AC signal<1.2V (RMS), bias voltage from 0 to -24V.

a. Communication measurement accuracy: ± 10mV. Measurement signal frequency response: 1Hz-1KHz.

b. Measurement accuracy of eddy current negative bias voltage: ± 0.10V.

7. CNC signal source output: Large CNC AC signal 10.0V-PPK, output accuracy ± 0.04V.

The frequency range of the CNC is 1-600Hz, with an output frequency accuracy of ± 0.2Hz. The output impedance is less than 150 ohms.

8. Positive and negative power output: can provide power for sensors and transmitters.

-24V， Large power supply of 40mA. Suitable for powering eddy current sensors with negative power supply.

+24V， Large power supply of 40mA. Suitable for powering various 24V input transmitters.

　　NE9282B Vibration Calibration PlatformRich functionality and wide applicability

1) Can dynamically calibrate various piezoelectric acceleration sensors, magneto electric velocity sensors, and eddy current displacement sensorsSensors.

2) Built in digital signal source, digital setting output analog vibration signal, used to verify vibration without sensorsDynamic transmitters, instruments, and vibration measurement systems. (Not provided temporarily)

3) Equipped with manual calibration function: able to manually set the frequency and amplitude digitally, and output any vibration for precisionDetailed personalized calibration;

4) Equipped with automatic verification function: through the NE9282A running on PCAfter setting up and editing the amplitude accuracy verification and frequency response test program and downloading it, it canFully automated testing and calibration of the calibrated vibration sensor and measurement system. (Not provided temporarily)

5) Can be placed horizontally or vertically for use in order to verify vertical or horizontal sensors. High output thrust, firmThe solid suspension vibration system can support various sensors with a mass of less than 1000 grams.