Nanjing quotation for mesh type stepped grille cleaning machine

Nanjing quotation for mesh type stepped grille cleaning machineApplication field

Urban sewage treatment plant: As a pre-treatment equipment, it removes solid impurities from urban sewage.

Industrial wastewater treatment: In the treatment of wastewater from industries such as food processing, pharmaceuticals, and printing and dyeing, impurities such as fibers and residues are removed from the wastewater.

Pump station: Remove solid impurities at the inlet to prevent them from entering the pump station and causing damage.

River management and aquaculture: removing floating debris and solid impurities in rivers to improve water quality; Remove residual bait, feces, and other impurities from the aquaculture water to maintain its cleanliness.

Nanjing quotation for mesh type stepped grille cleaning machineUsage Tips

Debugging phase: Conduct electrical debugging on electrical control related equipment to ensure the automation level of the equipment and reduce errors that may be caused by human operation; Check if the lifting function of the stepped grid of the mesh board is normal, and if the equipment runs smoothly, to ensure that there are no unnecessary blockages in the stepped grid of the mesh board.

Running process:

Regularly clean the remaining debris on the grille. If the debris is not cleaned regularly, the accumulation of more debris will greatly reduce the efficiency of the machine.

Regularly clean the garbage hanging on the discharge board according to the amount of garbage.

During operation, if fibrous debris is wrapped around the rotating brush shaft, it should be cleaned in a timely manner to avoid affecting the normal operation of the machine.

Maintenance and upkeep:

Regularly check whether the gearbox oil seal leaks oil, and replace damaged oil seals in a timely manner. If the oil level is insufficient, it should be refueled in a timely manner and replaced regularly. Generally, the equipment needs to be replaced with new oil after half a month of normal use, and then every three months thereafter.

The four bearings on the rack wall must be regularly lubricated with lithium based grease.

This machine should avoid long-term shutdown to ensure that all parts of the equipment are in good working condition. When the shutdown exceeds 7 days due to reasons, the sewage must be drained completely, and the grille must not be immersed in stagnant sewage for a long time.

Main technical parameters and external dimensions table

5、 Equipment model representation method: