Ningbo Reliable High Temperature and High Pressure Cleaning Machine

Pressure: 200BAR Flow rate: 900L/H Voltage: 380V/50HZ Hot water/steam Temperature: 95/155 ℃

Ningbo Reliable High Temperature and High Pressure Cleaning Machine

Usually, when we hear about high-pressure water cleaning machines, we feel that they are far away from us. In fact, it is also very common in our daily lives, such as small cleaning machines used in car washing and commercial cleaning machines used by cleaners in some large commercial squares. It consists of a clean water tank, a recycling bin, a scrubbing brush, a suction motor, a suction scraper, etc. The clean water tank is used to store clean water or add cleaning solution to clean water, while the clean water tank is used to suction and store sewage from the ground.

The high-pressure water cleaning machine has become a common tool in our daily lives. Mainly through the internal high-pressure pump, water is pressurized to form a high-speed fine 'water jet'. This device can be used for cleaning, with high efficiency, low cost, no damage to workpieces, no pollution to the environment, and easy operation. It is widely used in the production and manufacturing of hydraulic components for automotive parts and engineering machinery. Any mechanical product, including high-pressure water cleaning machines, will inevitably encounter some problems over time, especially when the water pressure suddenly drops, which will greatly reduce the cleaning effect. What is the reason for this situation?

Ningbo Reliable High Temperature and High Pressure Cleaning Machine

1. Inspect the sealing components inside the pressure regulating valve, overflow valve, and high-pressure water pump separately, such as whether the O-rings of the pressure regulating valve and overflow valve are worn, whether the spring and seat surface are worn, whether the O-rings inside the pump are worn, whether the water seal is damaged, and whether the one-way valve is worn or cushioned by foreign objects.

2. Check if the inlet filter is clogged. If the inlet filter is clogged and causes insufficient water intake, remove the filter and clean it with water. If the filter screen is frequently clogged due to unclean water sources, you can increase the external filter or replace it with a clean water source, otherwise it will cause greater damage to the machine;

3. Check if the high-pressure water outlet nozzle of the high-pressure water cleaning machine is severely worn. If the wear is severe, replace the high-pressure nozzle. The high-pressure nozzles of small pressure equipment are unlikely to experience wear and tear, as most of the high-pressure nozzles we provide have undergone overheating treatment. However, it is difficult to guarantee the high-pressure nozzles of large pressure equipment;