OSA86 series high-temperature solenoid valve (including explosion-proof type)

NegotiableUpdate on 04/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

OSA86 series high-temperature solenoid valve (including explosion-proof type)

Product Details

Performance Characteristics

Unique design, piston structure, long lifespan, temperature resistant coil, not easy to burn out, precision casting, exquisite appearance.

Scope of application
Steam system, high temperature system, heating system, high temperature back blowing dust removal system, drying equipment, petrochemical equipment, filtration equipment, industrial petroleum supply system.

Function Options

code name	Function Name	Functional Description
K	Normally open type	Power on valve closed, power off valve open
E	Explosion-proof type	Explosion proof grade: Ex dIICT4/5
S	With manual operation	This valve can be manually opened or closed
X1	Passive signal feedback	Mechanical contacts, suitable for gas media
X2	感应信号反馈	Active induction signal, DC6-24V
V	Specially designed vertical installation	Space Agency limited time adoption, limited pilot type
J	Equipped with energy-saving modules	Reduce coil temperature rise and power consumption, extend coil life

*The signal feedback device is limited to situations where the operating temperature is ≤ 80 ℃
*X1 passive signal feedback requires fluid pressure difference ≥ 1-3 bar
*There is currently no explosion-proof type for energy-saving modules

*Manual device features: only need to rotate 90 degrees, easy and fast operation!

Technical Specifications

Nominal Diameter	DN1-200
principle structure	pilot
Valve body material	铸钢（WCB）、（304、316）不锈钢
sealing material	PTFE、紫铜
ambient temperature	-30 ℃~+60 ℃ (explosion-proof type -20 ℃~+40 ℃) Special: -50 ℃~+100 ℃
fluid temperature	C42 ≤ 200 ℃, C5 ≤ 220 ℃, C6 ≤ 250 ℃, C7 ≤ 350 ℃, C8 ≤ 400 ℃, C9 ≤ 450 ℃ (other 650-800 ℃ can be customized)
Applicable fluids	High temperature fluids such as gases and liquids
connection method	Internal thread, flange, welding
Installation method	Horizontal installation, coil facing upwards (other methods can be customized)
fluid pressure	6-64bar
Protection level	Ordinary type IP54, explosion-proof type IP65, IP68 (specially designed for submersible type)

Electrical parameters

Conventional voltage	220VAC 50/60Hz 24VDC
Specially designed voltage	AC 50/60Hz、380V、110V、36V、24V
Specially designed voltage	DC 220V、110V、36V、12V
Voltage tolerance	±10%
Electrical connection (explosion-proof type)	Ordinary type: Standard junction box
Electrical connection (explosion-proof type)	Explosion proof type: M16 × 1.5 internal thread, reserved 1.5M wire (G1/2 or NPT1/2 can be customized)

*When using the above special voltage, the working pressure may change. Please be sure to consult our company first.

*When using a DC power supply, it is recommended that the distance from the control power output to the solenoid valve should not be too far to avoid affecting the working pressure.

*The above parameters are selected according to the requirements of the operating conditions.