Ordinary PET bottle label remover

Transport the PET plastic bottle material to the feeding port of the label removal machine, and there is a spiral push at the front of the label removal machine to push the bottle to the label removal section. The moving blade rotating by the spindle and the fixed blade on the cylinder wall undergo spiral friction, causing the label paper to fall off. There is a centrifugal cyclone design separation chamber at the outlet, which separates the peeled label from the PET bottle body. The label paper is blown out from the top label outlet, and the PET bottle is pushed out from the other side by the rotating spiral of the spindle. The spacing between the main shaft alloy blade and the inner wall blade can also be flexibly adjusted according to the size of the bottle body. Reasonably avoiding scratches on the bottle body by the blade, allowing the manufacturer to produce better quality bottle slices and sell them at higher prices.

Product Model	Power (kw)	Motor (V)	Speed (r/min)	Spiral power (kw)	Machine weight (kg)	Output (t/h)	Overall dimensions
BC-TB-3.5	7.5	380	350	0.75	650	500	4200*1200*1400
BC-TB-4	11	380	350	1.5	600	800	4500*1250*1450

Label packaging paper for various plastic bottles such as PET mineral water bottles, ice red/green tea, NutriExpress, cola, Sprite, and refreshing yogurt.

1. This machine needs to be installed on a level ground, and lubricating oil needs to be added to the gearbox before initial use!
2. Clean the machine to ensure that there are no impurities contaminating the raw materials and debris; During the cleaning of the mixing bin, hang the power off operation;
3. Connect the power supply to the electrical box, turn on the emergency stop switch, and adjust the timer value to be greater than 1; Activate the mixing button, check the direction of motor operation, whether there is any abnormal noise during machine operation, and whether the operation is smooth;
4. After completing all operations, turn off the mixing button and enter the feeding preparation stage; After the feeding is completed, close the lid, confirm whether the pressure port is fastened, and set the mixing time according to the proportion of different raw materials;
5. Start the mixing process, and after the mixing is complete, open the bottom feeding device. When feeding, do not insert your body parts into the mixing chamber or discharge port;
6. Do not fill the mixing bin with raw materials to avoid affecting the mixing quality;
7. If the machine is not used for a long time, please turn off the power;
8. If there is a significant difference in the specific gravity of the mixed materials, the mixing time should be appropriately increased.