Organic waste gas activated carbon adsorption device

This product has excellent adsorption performance, with a porous honeycomb structure, developed pore structure, large specific surface area, high surface activity, and high adsorption capacity; Its wind resistance coefficient is small, adsorption capacity is large, equipment energy consumption is low, operating costs are low, desorption and desorption are easy, and its performance and price are far superior to activated carbon particles or activated carbon fibers. It is suitable for the selection of high displacement, low concentration exhaust gas purification equipment. Honeycomb shaped activated carbon uses activated carbon powder as raw material and is made into dense honeycomb shaped activated carbon hollow blocks through special processes. It is an upgraded product of activated carbon, with a wide range of uses and diverse varieties. It is a product with good effect, low cost, and easy implementation in the treatment of industrial waste gas and air purification materials.

Treatment process of organic waste gas activated carbon adsorption device

exhaust gas---Primary filtration - Activated carbon adsorption - Precision filtration - Clean air

Working principle of organic waste gas activated carbon adsorption device

（1) Flow equalization section: The FQ-GQ series exhaust gas activated carbon adsorption purifier has a specially designed air inlet. The exhaust gas is introduced through the air inlet and diffused by the airflow. The exhaust gas is evenly distributed in the flow equalization section, allowing it to enter the pre-treatment section uniformly.

（2) Preprocessing: Multi mesh stainless steel wire mesh is used for preprocessing, which has strong adsorption and filtration capabilities. The airflow is compressed and expanded in this part, causing large particles in the exhaust gas to condense and filter due to inertia and collision with the wire mesh, greatly reducing the concentration of exhaust gas particles after flowing out of the pretreatment section. At the same time, other impurities can be intercepted in the pretreatment section, and there are also fire prevention functions.

（3) Strong adsorption: The strong adsorption section uses exhaust gas filtration material, which allows exhaust gas particles to collide with glass fibers in the material and be adsorbed. The exhaust gas further dries into powder in the filtration material. When the material is saturated, it can be removed and cleaned before reuse.

（4) (Type B) Odor removal layer: Using specialized honeycomb shaped low resistance activated carbon with high specific surface area, microporous structure, high attachment capacity, and high surface area activated carbon products. The exhaust gas comes into contact with the porous activated carbon with a large surface area, and the organic solvent pollutants in the exhaust gas are adsorbed to separate them from the gas mixture and achieve purification. The pollutants that can be effectively removed include toluene, xylene, acetone, ethanol, ether, formaldehyde, acetic acid, ethyl ester, styrene, odorous substances, etc. High strength glass fiber gradually densifies the structure; The windward side is green, and the exhaust side is white. The low compression performance maintains its appearance unchanged, making its filtering fibers conducive to storing oil mist and dust.

Temperature resistance:At 170 ℃, this product is also suitable for deodorizing exhaust gases. Waste gas treatment equipment activated carbon adsorption equipment material: carbon steel spray coating and 304 stainless steel optional.

Characteristics of Organic Waste Gas Activated Carbon Adsorption Device

（1) The purification and capture efficiency is very high, with a purification efficiency of 90-99%;

（2) Pure physical principles, no energy consumption, simple and convenient maintenance;

（3) Using filter materials, it is resistant to high temperatures, has low resistance, can be reused multiple times, and has low operating costs.

（4) Adopting a combination structure, with activated carbon adsorption in the later stage.

Application of Organic Waste Gas Activated Carbon Adsorption Device

This product is mainly used for exhaust gas treatment and can produce water-resistant honeycomb activated carbon and water-resistant honeycomb activated carbon. Honeycomb shaped activated carbon can remove pollutants to varying degrees, including carbon dioxide, nitrogen oxides, carbon disulfide, carbon tetrachloride, hydrogen sulfide, chlorine, benzene, xylene, acetone, ethanol, ether, methanol, acetic acid, styrene, phosgene, gasoline, kerosene, odorous substances, etc; This product has outstanding environmental and economic benefits in the fields of petroleum, chemical, painting, spray painting, glue making, printing, and improving air conditioning and air filtration equipment; And it is suitable for indoor air purification and treatment of catering fumes and exhaust gases.

Technical Parameter

case

Huakang Zhongtian provides organic waste gas activated carbon adsorption device for chemical plastic plants

Application scope of organic waste gas activated carbon adsorption device

The organic waste gas activated carbon adsorption device is suitable for industries such as electrical manufacturing, automobile production and maintenance, shipbuilding, steel structure processing plants, etc. It can also be used in conjunction with production lines for shoe adhesives, printed iron cans, chemical plastics, printing inks, cables, enameled wires, etc.