Oxidation tank water treatment impeller

Oxidation tank water treatment impellerIt is double banana shaped and cast with aluminum alloy, effectively preventing the problem of blade fracture; The inlet edge of the blade bends backwards and has automatic cleaning performance; Tighten it onto the shaft with a locking nut, making it easy to disassemble and replace during lifting and maintenance.

Oxidation tank water treatment impellerWidely used in the process flow of sewage treatment plants to promote and stir wastewater, sludge mixtures, industrial process liquids, etc. containing suspended solids, create water flow, strengthen stirring function, prevent sludge sedimentation and dead corners.

The impeller submersible impeller of the oxidation tank is suitable for sewage treatment plants to promote the mixing of suspended solid wastewater, mud, industrial processes and other liquids. The use of pool water circulation and the water flow generated during nitrification and denitrification processes to enhance mixing function and prevent sludge sedimentation is an important equipment in urban and industrial wastewater treatment processes.

This hybrid series adopts a multipole motor and a direct coupling structure, with low energy consumption and high efficiency; The impeller is cast or stamped, with high precision, high thrust, beautiful appearance, and compact structure.

This series of low-speed thrusters adopts a cycloidal pinwheel reducer, which has the advantages of low power, low speed, large impeller diameter, and large usage area. The impeller is made of polyurethane material and aluminum alloy casting, with high strength and strong corrosion resistance.

The hybrid series submersible is suitable for various water treatment and industrial processes to maintain uniform mixing and reaction of solid, liquid, and gas three-phase media.

The installation system of QJB submersible thruster mainly consists of a chain block, lifting bracket, lifting bracket seat, lifting ring chain, guide rod, limit bracket, base, etc. The low-speed impeller moves up and down along the guide rod through the guide wheel. The lifting bracket is installed on the lifting bracket seat and can rotate around its positioning axis to facilitate installation and maintenance. The limit frame of this installation system is in a "T" shape, with the upper end in contact with the low-speed impeller body and connected horizontally to the guide rod connecting plate with bolts (the guide rod connecting plate is welded to the guide rod after the low-speed impeller position is adjusted correctly), and the lower end is fixed with expansion bolts. To increase the reliability of the low-speed thruster during operation and reduce the vibration during the operation of the submersible low-speed thruster, V-shaped rubber shock absorbers are added to the low-speed thruster and limit frame.