Oxygen monitoring system

NegotiableUpdate on 02/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The core of the oxygen monitoring system adopts high-precision sensors, which can monitor the changes in oxygen content in the furnace in real time. There are also high-efficiency stainless steel filters, peristaltic pumps, sample gas sampling pumps, high-efficiency cooling and dehumidification condensers, stainless steel rotor flow meters, blowback solenoid valves, 24V power converters, and leakage protectors, etc. This system has the advantages of long lifespan, good stability, strong anti-interference ability, and simple and convenient installation

Product Details

An oxidation furnace is a device used for high-temperature oxidation of metal materials. Its principle is to react metal materials with oxygen at high temperatures to achieve oxidation. In the design and selection of oxidation furnaces, factors such as material oxidation resistance, temperature, and atmosphere control need to be considered. Different atmospheric conditions (such as oxygen content, gas type, etc.) also have an impact on the rate of oxidation reaction and product formation, and need to be adjusted according to the specific material conditions.

Oxygen supply is a crucial part of oxidation technology. In order to ensure that the oxidized metal in the furnace can be fully oxidized, it is necessary to control the oxygen concentration in practical engineering to not be too low. Therefore, an oxygen monitoring system is needed to monitor the oxygen concentration in the furnace in real-time online.

However, due to the high temperature inside the furnace, it is necessary to customize a pre-treatment unit to cool down, remove dust, and dehumidify the high-temperature sample gas inside the furnace. The GY8700 series oxygen monitoring system is specially customized for this operating condition.

Oxygen monitoring systemThe core adopts high-precision sensors that can monitor real-time changes in oxygen content inside the furnace. There are also high-efficiency stainless steel filters, peristaltic pumps, sample gas sampling pumps, high-efficiency cooling and dehumidification condensers, stainless steel rotor flow meters, blowback solenoid valves, 24V power converters, and leakage protectors, etc. This system has the advantages of long lifespan, good stability, strong anti-interference ability, and simple and convenient installation. At the same time, it has 4-20mA, RS485 signal output or wireless data remote transmission, adopts LCDTFT high-definition LCD display screen, and can also be linked to equipment such as oxygen top blown converter in the factory for use. When the oxygen concentration is too low, an alarm will be triggered immediately, and the linkage equipment will be activated to deliver oxygen into the furnace.

Basic Parameters:

Box material	Explosion proof stainless steel box body
output signal	① 4-20mA signal: standard 12 bit precision 4-20mA output chip, transmission distance of 1km ② RS485 signal: using standard MODBUS RTU protocol, transmission distance of 1.2Km ③ Voltage signal: 0.4-2V, 0-5V, 0-10V output, optional (choose one of voltage output and current output) ④ Switching signal: Standard configuration includes 1 set of passive contact relays with a capacity of 24VDC 3A ⑤ GPRS, 4G, WIFI, LORA, ZigBee and other wireless signals (optional)
receiving equipment	User computer, control alarm, PLC, DCS, DDC, etc
working method	Pump suction, continuous online monitoring
detection medium	Oxygen, customizable for other flammable, toxic, and harmful gases
Detection Principle	electrochemistry
Testing Scope	0-1%/5%/30%/100% VOL customizable
resolution	0.01/0.1/1
Detection error	≤± 3% F.S higher precision can be customized
Repeatability	≤±1%
linear error	≤±1%
response time	≤30S（
Working Voltage	AC220V， Maximum power: 100W
Operating Temperature	-20 ℃~50 ℃ (high temperature can be customized)
Operating Humidity	10-95% RH (non condensing) (customizable for high humidity)
work pressure	106KPa±20KPa
Sampling temperature	-20℃～200℃
Sampling humidity	0-90%RH
sensor lifespan	2-6 years (depending on sensor principles and usage environment)
防爆形式	Explosion proof stainless steel box body
Explosion-proof rating	Detector: ExdbIICT6Gb	ExdbIICT6Gb/ExtDA21IP66 T80℃
Protection level	IP66 waterproof splash and short-term rain, long-term rain requires a rain cover
connecting cable	① Choose a three core shielded cable for 4-20mA and a four core cable for RS485. When the distance exceeds 1000 meters (with one detector), the single wire diameter should be ≥ 1.5mm, and the shielding layer should be grounded. ② Wireless transmission: It can be equipped with built-in LORA and Zigbee modules for short-range wireless transmission; Can be equipped with an external GPRS/4G module for remote data transmission to the cloud platform. History can be viewed on both the computer and mobile devices without distance limitations (optional)
alarm method	On site sound and light alarm, external alarm, remote controller alarm, computer data acquisition software alarm, etc. (optional)
Alarm Settings	Standard configuration includes two levels of alarms, with adjustable alarm modes: regular high and low alarms, and interval control alarms
Overall dimensions	To be determined, customized products are subject to factory inspection
Installation method	Floor standing installation
Measurement certificate	Optional, customer pays for expenses
Attachment	One copy each of the packaging box, instruction manual, certificate of conformity, and delivery note
Optional accessories	Drying cylinder, pressure reducing valve, tar filter, peristaltic pump, 7-inch touch screen display, high-efficiency cooling and dehumidification condenser, standard gas interface. Computer monitoring accessories: free upper computer software, USB to RS485 conversion cable. If network transmission is required, an RS485 to Ethernet converter is also needed.