PEW1000 one cubic meter formaldehyde emission climate chamber (1m3)

NegotiableUpdate on 01/02

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

PEW1000 one cubic meter formaldehyde emission climate chamber (1m3)

Product Details

1、 Product Overview

This product is suitable for the determination of formaldehyde emissions from various indoor decoration materials such as artificial boards, composite wooden floors, carpets, carpet liners, and carpet adhesives. It can also be used for constant temperature and humidity balance treatment of wood or artificial boards, as well as for the detection of volatile harmful gases in other building materials. This product can simulate indoor climate environment to the maximum extent, making the detection results more realistic.

2、 Execution standards

National Standard

GB 18580-2017Indoor decoration and renovation materials - formaldehyde emission limits in artificial boards and their products

GB 18587-2001Appendix to "Indoor Decoration Materials - Limits of Harmful Substance Release from Carpets, Carpet Pads, and Carpet Adhesives"A(Normative Appendix): Small Environmental Test Chamber Method.

GB/T 17657-2013Test Methods for Physical and Chemical Properties of Artificial Boards and Decorative Artificial Boards

LY/T 1980-2011Volatile Organic Compounds and Formaldehyde Release Detection Chamber

LY/T 1981-2011Formaldehyde emission gas analysis method detection box

JG/T 344-2011Indoor Environmental Testing Chamber for Construction Projects

American Standard

ASTM D 6007-02Standard Test Method for Determining Formaldehyde Concentration in Gas Emissions from Wood Products in Small Environmental Chambers

European Standard

EN 717-1 2004The Wood based Board-Testing of formaldehyde releasePart: Determination of formaldehyde release using a test chamber

3、 Technologyparameter

serial number	project		Performance Specifications
1	Volume size	Studio Capacity	1 m3± 0.02 m3
2		studio	850×1080×1100mm(Wide)×deep×High)
3		appearance	1760×1300×1780mm(Wide)×thick×High)
4		Gate (doorway)	850×1100mm(Wide)×High)
5		observation window	225×365mm(Wide)×High)
6	temperature	temperature range	15～30 ℃
7		temperature fluctuation	≤ ±0.5 ℃
8		Temperature Uniformity	≤±0.8 ℃
9		temperature resolution	0.1 ℃
11		Heating and cooling rate	≥0.5 ℃/min
12	humidity	humidity range	35～70 % RH
13		Humidity fluctuations	≤ ± 2% RH
14		Humidity uniformity	≤ ±2 % RH
15		Humidity resolution	0.1 % RH
17		Humidity stabilization time	≤ 40min
18	Ventilation and sealing	Air exchange rate	0.2~2.0time/hour
19		Center wind speed (adjustable)	0.1～1.0 m/s
20		sealing performance	plus1000PaOverpressure, leakage less than1×10-3m3/min
21		Equipment recycling rate	＞80 %
22		Relative positive pressure maintenance	10±5 Pa
23	material	Cabin material	SUS304Mirror-finished stainless steel1.5mmRounded corners, fully welded and polished
24		Shell material	Q235Acold-rolled steel sheet1.5mmSurface electrostatic spraying, white
25		Sealing material	Imported polytetrafluoroethylene and fluororubber
26		Insulation material	thickness80 mmHigh density polyurethane foam molding
27	Operation and monitoring	human-machine interface	7Inch color touch screen
		monitoring records	Can monitor and automatically record the following data in real-time: temperature humidity runtime Equipment alarm and fault occurrence time.
		Sampling interface	3A（Φ8mm）
28	safetypreventprotect	System protection	Power overload, leakage, phase loss, undervoltage, overvoltage, phase sequence protection Refrigeration system high and low pressure protection, overload protection Overheating protection for heating components Motor overcurrent protection Fan and air pump overheat and overload protection Humidification and water shortage protection
29	other	noise	≤60 dB
30		power supply	AC220V 3KW
31		Humidification water	distilled water
32		Water replenishment cycle	>240Hour (continuous operation)

4、 Product Features

Use large-area heat exchangers，inside the cabinThe heat transfer temperature difference is small, the heat exchange is uniform, the temperature is stable, and there will be no condensation.

microcomputerPIDAdjustment, fast response speed, high control accuracy, humidity balance of about half an hour, far faster than dew point method, shortening the experimental period.

The moisture adopts the company's unique low-temperature evaporation technology, which has no resistance, no temperature difference, and gentle humidification without condensation.

Low background concentration design, all components such as sealing materials and air displacement pipelines are non releasingformaldehydeClean materials such as stainless steel, copper, tetrafluoroethylene, etc.

Energy saving design commonly uses frequency converters and thyristors to regulate loads and achieve lower operating power.

Through precision filtersWater washing deviceThe processed gas supply is very clean and can isolate external pollution.

Microcomputer intelligent control, automatic temperature control, automatic humidity control, automatic alarm, automatic recording, one key switch, full process monitoring.

Gas supply components、The filtering components and humidification components are all built into the control cabinet, which saves space, has low noise, and is simple and beautiful.