PP environmental ball

The PP environmentally friendly spherical packing material for acid mist tower is made of polypropylene plastic in the form of a spherical shape. There is a reinforcing ring in the middle of the ball along the entire circumference, with twelve spherical petals on each side arranged radially along the central axis. It is suitable for devices such as carbon dioxide degassing tower and contact reaction tower.

　　PP environmentally friendly spherical packing material for acid mist towerProduct Introduction:

　　PP environmentally friendly spherical packing material for acid mist towerIt is made of polypropylene plastic and has a spherical shape. There is a reinforcing ring in the middle of the ball along the entire circumference, with twelve spherical petals on each side. It is arranged radially along the central axis and is suitable for devices such as carbon dioxide degassing towers and contact reaction towers. Environmentally friendly balls have good corrosion resistance, large gaps, high flux, low resistance, low energy consumption, light weight, easy loading and unloading, reusable, and low operating costs The characteristic of TRI filler is that it has a body without any large surface, but is composed of many grid shaped branch rods connected and combined into a hollow sphere. This type of filler not only has a high porosity but also a large free cross-sectional area in all aspects, with very little anisotropy. Due to the combination of many grid shaped branches and rods, which provide many converging and dispersing edges for the flowing liquid, not only can the surface of the packing be well wetted, but also many droplets can be formed in the liquid, which can promote the surface renewal of the liquid and facilitate mass transfer between the gas-liquid phase. It can be widely used for gas absorption and purification, and can also be used for defoggers.

Installation Specification for Plastic Bulk Packing Materials

1、 Safety of lifting device during loading process:

All construction personnel entering the tower must wear safety helmets, while personnel outside the tower and on the ground must wear safety helmets. Personnel on the tower must wear safety belts.

2、 Safety and fire prevention:

During the installation of fillers, welding is not allowed.

3、 Packing installation method:

When filling, it should always be poured from a certain height away from the filling layer. People should not stand directly on the filling material to prevent deformation and uneven density. Wooden boards should be laid on the filling material to disperse the force.

During the packing process, it is not allowed to leave other debris, packaging bags, etc. inside the tower together with the packing.