Welcome Customer !

Membership

Help

Nantong Wote Environmental Protection Technology Co., Ltd
Custom manufacturer

Main Products:

hbzhan>Products

Peracetic acid colorimetric tube/Peracetic acid detection tube LH

NegotiableUpdate on 02/11
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin
Overview
Description: 0.1-10 peracetic acid colorimetric tube/peracetic acid detection tube Test range: 0.1-0.5-1-2-5-10mg/l, 50 pieces/box. Validity period: 18 months.
Product Details

0.1-10 peracetic acid colorimetric tube/peracetic acid detection tube

Product Introduction:

Test paper name

Range

Number of tests

Peracetic acid colorimetric tube

0.1-0.5-1-2-5-10mg/l

50 pieces/box

Detection time: 30 seconds

Packaging specifications: PE plastic pipe, aluminum film seal, 50 pieces/box

Validity period: 18 months

【 Instructions for use 】

1. Pull out the thin wire of the tube.

2. Drive out the air from the pipe.

3. Insert into the tested water quality and stop when inhaling water, usually around.

4. After the specified time, compare the color with the standard color chart.

[Attention]

1. If the pH value of the tested solution is not within the range of 6-9, please neutralize it with dilute sulfuric acid or dilute sodium hydroxide in advance.

2. When the concentration of peracetic acid exceeds 100mg/l, the color development becomes weaker with increasing concentration. When the concentration of peracetic acid is around 3-4mg/l, the color displayed is equivalent to the color when the concentration of peracetic acid is around 600mg/l. When the approximate concentration of peracetic acid in the tested solution cannot be determined, please dilute it for use.

3. Color comparison: Maintain a distance of 1cm parallel to the color chart for color comparison.

4. In the presence of strong oxidants, color changes may also occur. For example, residual chlorine, ozone and other oxidizing substances.

☆ Easy to operate - no need for auxiliary instruments, direct detection, no need for professional laboratories and technical personnel

☆ Fast and efficient - analysis of a water sample can be completed in 3-5 minutes, with all reagents and accessories built-in, no need for additional preparation

☆ Reliable results - introducing Japanese technology, results are consistent with national standards and methods*

☆ Convenient to carry - PE plastic test tube, small size, light weight, not easily damaged

☆ Convenient storage - can be stored at room temperature

[Scope of Application]

The product is widely used in industries such as food and beverage, scientific research, aquaculture, and environmental monitoring