Phosphating line automatic paper feeding inclined mesh paper tape filter

Phosphating line automatic paper feeding inclined mesh paper tape filter

Inclined mesh paper tape filterThe paper conveyor belt structure of the traditional flat paper tape filter machine is not available. The side of the filter machine frame has an overflow port, and when the liquid level in the tank is full, it will not flow outside the water tank. The bottom plate tilts towards the paper output direction, and the paper output position gradually rises to facilitate water control. The used filter paper carries very little liquid.

Due to the high liquid level and water pressure in the liquid pool, high-density filter materials can be used to achieve higher filtration accuracy, but they are not suitable for filtering large flow liquids. The liquid flow rate should not exceed300It is advisable to increase every minute.

When the filter paper roll is about to be used up, the filter paper depletion alarm switch (optional) can be used to remind you to replace the paper as soon as possible without affecting production use.

Used filter paper can be automatically retracted for easy handling.

This form of filter paper is fed by a square tube driven by a motor and rolled out (it can also be designed to place the filter paper in the2Between rubber rollers, utilize2The squeezing of a rubber roller brings out the used filter paper.

In addition, if there are fewer impurities in the liquid and the filter paper is not easily clogged, it will cause the filter paper to not run for a long time, and the filter paper will stick to the lower mesh plate, causing the filter paper to break when the motor starts. In such situations, it is recommended to add a time relay or a manual start motor button to the filter to avoid the filter paper not moving for a long time.

Phosphating line automatic paper feeding inclined mesh paper tape filterThe specific model will be determined according to the on-site requirements.

Example of usage requirements:

Main configuration:

The appearance of the water tank is approximately1200*510*300mm.

RFGL1-50paper tape filter1The platform.

Water tank with high and low liquid level alarm1Set up（24Voltage), the liquid level of the paper tape filter increases and a high and low alarm is triggered for on-site use.

400Millimeter filter paper3The roll and filter paper are sealed.

water pump1Platform, traffic50L/minHead lift30m.

The overall material is made of304stainless steel

Slag collection box1One.

withPaper shortage alarm, time relay