Photoacoustic trace gas analyzer

NegotiableUpdate on 02/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The photoacoustic trace gas analyzer displays the detection concentration curve in real-time, with fully automatic or manual zero calibration, allowing customers to freely choose. High detection accuracy and good stability, suitable for various trace gas concentration detection scenarios.

Product Details

Schulz SPTr GAS ® The ANALYZER photoacoustic trace gas analyzer is equipped with a touch display control screen, a reasonable menu structure distribution, and an intuitive and friendly operating interface. All status displays, threshold values, and alarm values are provided in analog and digital formats. Real time display of detection concentration curve, fully automatic or manual zero calibration, freely chosen by customers. High detection accuracy and good stability, suitable for various trace gas concentration detection scenarios.

Photoacoustic spectroscopy is a new spectroscopic technology based on the photoacoustic effect, which is different from traditional infrared spectroscopy technology. It effectively converts light signals into sound signals and calculates the final gas concentration through the detection of sound signals by precision microphones. Due to the special optical structure of photoacoustic spectroscopy technology and the special calculation process in signal acquisition and processing, this method can efficiently collect weak photoacoustic signals and effectively eliminate the interference of background signals. It is very suitable for trace gas concentration detection and interference free detection in complex environments.

Photoacoustic trace gas analyzerApplication direction:

▪ Industrial online monitoring (semiconductor, power, chemical, metallurgical, etc.)

▪ Environmental pollution detection

▪ On site inspection and troubleshooting

▪ Exhaust gas detection

▪ Gas process control

▪ Air pollution detection

▪ TOC detection in water

▪ Blast furnace gas detection

▪ Garbage incineration and landfill

▪ Tunnel gas detection

technical indicators

Product Model	SPTr-GAS® ANALYZER
Detection Principle	Photoacoustic spectroscopy
Display Zuilowvalue	0.1 ppm (typical), Different according to the detection range
response time	Cycle time<20s
Detection limit	<0.01% FS varies depending on the detection range
warm-up time	When the ambient temperature is 20 ° C (68 ° F), it takes approximately 15 minutes to heat up to 50 ° C (122 ° F);
Operation method	Touch screen, 5.6 "LCD
analog output	4mA~20mA (during normal operation) 2mA (during preheating or status alarm)
Analog output range	Default settings: The lower range corresponds to 4mA, and the upper range corresponds to 20mA, which can be adjusted by the user
Alarm contact output	6-way output The following signals can be allocated through the relay output allocation function: X1 device malfunction error alarm Sample gas sampling control solenoid valve control signal during x1 automatic calibration X1 automatic calibration zero point gas control solenoid valve control signal XN channels (N is the number of channels) automatic calibration range gas control solenoid valve control signal z XN channels (N is the number of channels) for measuring gas concentration upper/lower limit alarm
Relay contact capacity	1A contact (250V AC/2A, resistive load)
communication	Serial port output RS232 (DB-9 female head) RS485 modbus
Working Voltage	198~242V AC, 50/60 Hz power<125W
power interface	EN60320 C1
fuse	Fuse current 3A, fast melting fuse size: 5mm x 20mm
Shell protection level	IP41 (EN60529)
weight	Unpackaged about 10kg with packaging about 19kg
intake flow	(0.2~1.2) L/min (flow fluctuation should be ≤ 0.02 L/min) Note: The instrument flow rate for photoacoustic spectroscopy detection principle type is (1.5~2.0) L/min
intake air temperature	(5~35)℃
intake pressure	116 kPa (maximum)
Moisture in gas	• Non condensing • Dew point of intake: 5 ℃± 0.1 ℃ (this is necessary when the measurement channel includes SO2 and/or NO)
Particulate matter in gas	100µg/m³, ≤1µm
Zero point calibration gas	99.999% N2 (nitrogen)
Third point calibration gas (midpoint)	0.375~0.625 of the full range of the measured gas
Full range calibration gas (user calibration)	0.75~1.25 of the full range of the measured gas

Gas detection range category:

gas		Detection range	linear error	precision	Background gas
NH3	Ammonia	0…100ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
NH3	Ammonia	0…1 g/m3	0.1% FS	0.1% FS	Air or N2
C5H10	Cyclopentane	0…100ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
C3H6O	Acetone	0…2000ppm	0.1% FS	0.1% FS	Air or N2
C2H6O	Ethyl Alcohol	0…2000ppm	0.1% FS	0.1% FS	Air or N2
C3H8O	Isopropyl Alcohol	0…1000ppm	0.1% FS	0.1% FS	Air or N2
CH4O	Methyl Alcohol	0…500ppm	0.1% FS	0.1% FS	Air or N2
NF3	Cyclopentane	0…20ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
N2O	Nitrous Oxide	0…500ppm	0.1% FS	0.1% FS	Air or N2
C2Cl4	PERC	0…800ppm	0.1% FS	0.1% FS	Air or N2
SO2F2	ProFume®	0…1 g/m3 0…1000ppm 1…150 g/m3	0.1% FS	0.1% FS	Air or N2
CCl3F	R11	0…500ppm	0.1% FS	0.1% FS	Air or N2
C2Cl3F3	R113	0…50ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
C2F6	R116	0…100ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
CCl2F2	R12	0…100ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
C2HCl3F2	R122	0…100ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
C2HCl2F3	R123	0…100ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
CClF3	R13	0…100ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
CF4	R14	0…100ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
CHClF2	R22	0…100ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
CHF3	R23	0…150ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
C8H8	Styrene	0…50ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
SO2	Sulfur dioxide	0…100ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
SO2	Sulfur dioxide	0…1000ppm	0.1% FS	0.1% FS	SF6
C8H20O4Si	TEOS	0…100ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
C2HCl3F2	Toluene	0…100ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
C2HCl3	TRI	0…1000ppm	0.1% FS	0.1% FS	Air or N2
CH3Br	Methyl Bromide	0…2 g/m3	0.1% FS	0.1% FS	N2 (only)
For other gas please contact us for more information.