Pig Factory Disinfection Equipment _ Pig House Sterilization and Disinfection

Spray disinfection and cooling in aquaculture plant

sketch　

Disinfection of pig farms is an important component of pig farm management, and disinfecting pig farms is the most fundamental thing. Through disinfection, pathogens can be eliminated outside the pig farm, preventing them before they occur.This reduces the risk of disease in pigs, benefits pig farmers the most, and provides consumers with high-quality pork. The "Hygiene and Epidemic Prevention System for Pig Farms" has clear regulations on this.Disinfection work is a well-known issue in every pig farm, but many farmers do not disinfect thoroughly, appearing to have disinfected on the surface but failing to achieve the purpose of disinfection. The disinfection of pigsties is different from that of the outside world, as there is no feces in the field and there are a large amount of residual materials such as feces, urine, and placenta in the pigsty. And feces are constantly excreted without interruption, so thoroughly disinfecting the pigsty is a difficult task unless the pigs are moved out of the pigsty,Generally, pigsty disinfection is done once or twice a week. The company has developed special spray disinfection equipment for pig houses and the whole plant, which can not only be used for disinfection, but also for cooling in summer.

Spray disinfection and cooling in aquaculture plantprinciple

The spray disinfection and cooling equipment of the aquaculture plant uses the core water treatment technology of the company to pressurize the tap water+disinfectant/through (physical and technical treatment of microns) with a motor driven high-pressure pump, and spray out through a special stainless steel pipe and atomizing nozzle to achieve the aerosol effect. Mist particles with a diameter of 5-20 microns can float in the air for a long time and spread to various corners. It has achieved a thorough disinfection effect. And it has multiple effects such as deodorization, dust removal, and cooling. The normal disinfection time is 5-10 minutes each time.

Spray disinfection and cooling in aquaculture plantComposition of

1Spray disinfection and cooling in aquaculture plantThe equipment adopts ceramic plunger pump, dedicated matching motor, and integrated electrical control technology inside the system, which has stable working performance. It is equipped with an external micrometer level water purification filter that can be replaced, easy maintenance, and convenient operation.

2. Pump station unit: The high-pressure ceramic plunger pump can generate high-pressure water of 3-7MPa, adapt to stable pressure adjustment between 5kg/h and 1800kg/h flow rates, and has multiple protection functions; Stable performance, reliable and durable, strong continuous operation.

3. Ultrafine atomizing nozzle: the core part is made of titanium alloy material and has its own pressure limiting starting valve. The shell is made of copper or stainless steel material, with fine spray, no wear, small pressure loss, anti clogging, no dripping, etc.

Spray disinfection and cooling in aquaculture plantCharacteristics of

1. Easy to operate, fully automatic control, normal disinfection time of 5-10 minutes per time (depending on the specific situation of the pigsty and disinfectant).

2. The main equipment operates as an ultra-low noise, environmentally friendly deodorization device that meets national standards.

3. The equipment installation period is short, and there is no need to increase civil engineering or change existing facilities.

4. The entire equipment occupies only 1 square meter, saving space.

5. Water filtration system: The water inlet and pipeline end nozzle filtration system: RO strong filter, equipped with 5 micron and 10 micron dual stage water filters, effectively solves water quality problems, and the nozzle is not blocked.

6. Control unit: microcomputer fully automatic control, automatic filtering, automatic spray, with PLC control interface, to achieve automatic control without personnel supervision.

7. High pressure shunt valve unit: The high-pressure shunt valve can automatically supply or discharge high-pressure water to the multi-channel ultrafine nozzle unit according to requirements.

8. High pressure pipeline: using high-pressure seamless copper pipe, high-pressure seamless stainless steel pipe or high-pressure rubber steel wire composite pipe, the pipeline length can reach 500 meters.

Spray disinfection and cooling in aquaculture plantProcess route

Filtration system → tap water+disinfectant → atomization system → high-pressure pipeline → disinfectant vaporization → disinfection purpose

Applicable locations:Breeding industry, planting industry, sewage treatment plant, quarantine stationGarbage transfer stations, landfills, chemical plants, and other places with odors or requiring disinfection

Technical Parameter