-
E-mail
yewu@pxqxtc.com
-
Phone
19179987020
-
Address
No. 2-325, Zone C, Xiangdong District Industrial Park, Pingxiang City, Jiangxi Province
Product Categories
Pingxiang Qunxing Environmental Engineering Co., Ltd
Plastic saddle ring
NegotiableUpdate on 02/18
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The plastic rectangular saddle ring is an improvement on the arc saddle ring, with the main difference being that a pair of arc-shaped surfaces are changed to rectangular surfaces, and the inner and outer curvature radii are different, thus avoiding the disadvantage of easy stacking, making the bed porosity uniform, and improving the liquid distribution performance. Compared with the Rascal ring or saddle ring, the liquid distribution performance has a higher flooding point, lower pressure drop and mass transfer unit height.
Product Details
Product Introduction
Plastic saddle ringIt is an improvement on the saddle shaped ring, with the main difference being that a pair of arc-shaped surfaces are changed to rectangular surfaces, and the inner and outer curvature radii are different, thus avoiding the disadvantage of easy stacking, making the bed porosity uniform, and improving the liquid distribution performance.Plastic saddle ringCompared with the Rascal ring or saddle ring, the liquid distribution performance has a higher flooding point, lower pressure drop and mass transfer unit height.
Plastic saddle ringIt's made of polypropylene（The circular chemical filler made from PP is structured by changing the traditional saddle shaped ring's curved surface to a rectangular surface, avoiding the stacking of fillers and improving the uniformity of bed porosity. This product is mainly used in equipment such as drying towers, absorption towers, and regeneration towers in industries such as chemical and environmental protection. It exhibits characteristics of low resistance and high flux in absorption operations such as desulfurization, decarbonization, and nitric acid production. By designing the difference in curvature radius between the inside and outside, the liquid distribution performance has been improved, and the gas-liquid mass transfer efficiency has been significantly improved compared to traditional packing materials.
Product Features:
Plastic saddle ringIt has the characteristics of high porosity, low pressure drop and mass transfer unit height, high flooding point, sufficient gas-liquid contact, small specific gravity, high mass transfer efficiency, pressure reduction, high flux, high efficiency, high load elasticity, and good pollution resistance.
Product Material:
polyethylene(PE, polypropylene (PP), glass fiber reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinylidene fluoride (PVDF))
Product Application:
The saddle ring can be widely used in drying towers, absorption towers, cooling towers, washing towers, and regeneration towers in industries such as petroleum, chemical, metallurgical, chlor alkali, coal gas, and environmental protection.
Product Overview:
Plastic saddle ringSaddle shaped packing is similar to a saddle shape, and the main liquid channels in this packing layer are arc-shaped. The gaps in the packing layer are more continuous than those in the annular packing (especially compared to the Rascal ring packing), which can make the gas flow mainly upward Flow along an arc-shaped channel.
