Pneumatic Y-shaped angle seat valve price

Pneumatic Y-shaped angle seat valve priceDue to its excellent performance and reliable working principle, it is widely used in industrial fields where precise flow control is required, especially in process flows with high medium requirements. Commonly used for controlling high temperature, high pressure, or corrosive media. Applied to short-term frequent start-up, it has the characteristics of sensitive response and accurate action. When used in conjunction with solenoid valves, pneumatic control can accurately control gas and liquid flow rates. It can meet the requirements of accurate temperature control and liquid dripping. The wet heat sterilization cabinet should use angle seat valves to control steam volume and temperature accurately. When not in operation, the valve is normally closed (open) due to the force of the spring. When the actuator piston is compressed by gas, the valve opens (closes). The double acting form relies on compressed gas to control valve opening and closing.

Working Principle:

When the pneumatic actuator receives a gas source signal, the air pressure inside the pneumatic actuator will cause the valve core to move, changing the gap between the valve core and the valve seat, thereby adjusting the flow rate of the medium.

When the pneumatic actuator releases air, the spring or other mechanical device will cause the valve core to return to its original position, the valve will close, and the medium flow will stop.

Pneumatic Y-shaped angle seat valve pricePerformance advantages:

Widely applicable: suitable for control under special working conditions such as high temperature, high pressure, and corrosive media, with strong applicability.

High fluid control accuracy: The Y-shaped angle seat valve has a reasonable structural design, which can provide high fluid control accuracy and is suitable for situations that require precise flow control.

Good sealing performance of valve seat: The valve seat of Y-shaped angle seat valve is designed as an angled seat, which has good sealing performance and can effectively prevent medium leakage.

Wear resistance: Due to the large contact area between the valve seat and the valve core, it can reduce wear and extend the service life of the valve.

Easy to maintain: The Y-shaped angle seat valve has a simple structure, is easy to maintain, is easy to clean and repair, and reduces downtime.