Portable photoacoustic spectroscopy trace detection

NegotiableUpdate on 02/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The special optical structure of photoacoustic spectroscopy and the special calculation process in signal acquisition and processing enable this method to efficiently collect weak photoacoustic signals and effectively eliminate background signal interference. It is very suitable for trace gas concentration detection and interference free detection in complex environments.

Product Details

Schulz SPTr GAS ® Tracer isPortable photoacoustic spectroscopy trace gas analyzerIntegrate all functional modules into a 1/2 19 "chassis, equipped with a touch display control screen, a reasonably distributed menu structure, and an intuitive and friendly operating interface. All status displays, threshold values, and alarm values are provided in analog and digital form. Real time display of detection concentration curves, fully automatic or manual zero calibration, can be freely selected by customers. The detection accuracy is high, the stability is good, and it is suitable for various trace gas concentration detection occasions.

Photoacoustic spectroscopy is a new spectroscopic technology based on the photoacoustic effect, which is different from traditional infrared spectroscopy technology. It effectively converts light signals into sound signals and calculates the final gas concentration through the detection of sound signals by precision microphones. Due to the special optical structure of photoacoustic spectroscopy technology and the special calculation process in signal acquisition and processing, this method can efficiently collect weak photoacoustic signals and effectively eliminate the interference of background signals. It is very suitable for trace gas concentration detection and interference free detection in complex environments.

Portable photoacoustic spectroscopy trace detectionApplication direction:

▪ Industrial online monitoring (semiconductor, power, chemical, metallurgical, etc.)

▪ Environmental pollution detection

▪ On site inspection and troubleshooting

▪ Exhaust gas detection

▪ Gas process control

▪ Air pollution detection

▪ TOC detection in water

▪ Blast furnace gas detection

▪ Garbage incineration and landfill

▪ Tunnel gas detection

Advantages of portable photoacoustic spectroscopy trace detection products

Effectively shielding against humidity interference in the detection environment: The infrared humidity detection module is directly configured inside the photoacoustic module.

Shielding interference caused by unstable temperature: The photoacoustic spectrum is heated to 50 degrees and maintained at this temperature for detection.

Shielding other gas interference: By detecting weak photoacoustic signals, amplifying and calculating gas concentration through precise signal amplification

Internally integrated air pump and three automatic control valves for sampling points

Analyzer configuration internal activated carbon filter

Install replaceable dust filters on sampling tubes near each detection point

According to different types of gases, the zero point can be automatically calibrated with air

technical indicators

Product Model	SPTr-GAS®300 Tracer
通道	Refer to the analyzer nameplate or factory inspection report for channel configuration. The channel configuration information includes: -Measure gas type -Measurement range -Measurement error
response time	Cycle time:<20s
warm-up time	Approximately 30 minutes (depending on different detector configurations)
resolution	Usually: 0.1 g/m3 varies depending on the detection range
Operation method	Touch screen, 5.6 "LCD
analog output	4mA~20mA (during normal operation) 2mA (during preheating or status alarm)
Allow load resistance	250Ω~350Ω
Alarm contact output	Equipment status alarm Measurement channel upper/lower limit alarm Note: When the measured value is greater than the upper limit alarm value or less than the lower limit alarm value, the relay will close due to electric shock. All relays are isolated from each other and from internal circuits.
Relay characteristics	1A contact (250V AC/2A, resistive load)
communication	Serial port output RS232 (7-pin connector blue/black cable)
Working Voltage	(198~242)V AC, 50/60 Hz
power interface	EN60320 C1
fuse	Rated current: 3A, Blow characteristic: Fast Acting Size: 5mm x 20mm
Shell protection level	IP42 (EN60529)
weight	约15 Kg (typical)

Gas detection range category:

gas		Detection range	linear error	precision	Background gas
NH3	Ammonia	0…100ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
NH3	Ammonia	0…1 g/m3	0.1% FS	0.1% FS	Air or N2
C5H10	Cyclopentane	0…100ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
C3H6O	Acetone	0…2000ppm	0.1% FS	0.1% FS	Air or N2
C2H6O	Ethyl Alcohol	0…2000ppm	0.1% FS	0.1% FS	Air or N2
C3H8O	Isopropyl Alcohol	0…1000ppm	0.1% FS	0.1% FS	Air or N2
CH4O	Methyl Alcohol	0…500ppm	0.1% FS	0.1% FS	Air or N2
NF3	Cyclopentane	0…20ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
N2O	Nitrous Oxide	0…500ppm	0.1% FS	0.1% FS	Air or N2
C2Cl4	PERC	0…800ppm	0.1% FS	0.1% FS	Air or N2
SO2F2	ProFume®	0…1 g/m3 0…1000ppm 1…150 g/m3	0.1% FS	0.1% FS	Air or N2
CCl3F	R11	0…500ppm	0.1% FS	0.1% FS	Air or N2
C2Cl3F3	R113	0…50ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
C2F6	R116	0…100ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
CCl2F2	R12	0…100ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
C2HCl3F2	R122	0…100ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
C2HCl2F3	R123	0…100ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
CClF3	R13	0…100ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
CF4	R14	0…100ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
CHClF2	R22	0…100ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
CHF3	R23	0…150ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
C8H8	Styrene	0…50ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
SO2	Sulfur dioxide	0…100ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
SO2	Sulfur dioxide	0…1000ppm	0.1% FS	0.1% FS	SF6
C8H20O4Si	TEOS	0…100ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
C2HCl3F2	Toluene	0…100ppm	0.5ppm / 0.1% FS	0.1ppm / 0.1% FS	Air or N2
C2HCl3	TRI	0…1000ppm	0.1% FS	0.1% FS	Air or N2
CH3Br	Methyl Bromide	0…2 g/m3	0.1% FS	0.1% FS	N2 (only)
For other gas please contact us for more information.