Precision transient speed monitoring parameters

DF9011Precision transient speed monitoring parameters

performance metrics

▲ Standard desktop metal chassis.

• ABSFace frame, flexible film panel.

▲ Power supply: At the input power supply85～265VacWithin the range, all instruments can work stably;

The rated power consumption is15watts.

• Provide power supply for sensor operation;

current35 mA；

Voltage:+12~+24V and -12~-24V optional(According to the information provided at the time of ordering)

• Signal input: Connect the magneto electric (resistive) sensor input signal, frequency: 20KHz

Signal amplitude (peak to peak) ≮ 100mV.

• Measurement range: keyboard setting，Optional;

Measurement accuracy better than±2 r/min(Full scale).

▲ Number of teeth: any from 1 to 255;

• Display: SuperHigh brightness red LED digital display;

Digital display accuracy:± 1 word；

• Measurement frequency range: 0～10 KHz.

▲ Record output:Standard current with output short-circuit protection function.

4～20 mA(or0～10 mACustomized), load capacity≮500Oh?

Buffer sensor signal output: with short-circuit protection function, output impedance100Oh.

• DF9011Precision transient speed monitoring parametersRelays: Three sets of relays, each with a set of contact outputs (normally open, midpoint);

Contact output capacity:AC220VThe2A

• Usage environment: temperature -10～60℃；

Relative humidity: not greater than95%， no condensation.

• Panel size: 160mm × 80mm；Chassis depth: 200 mm

Installation hole size:（151±0.5）mm×（76±0.5）m