Prestressed pipe pile deflection meter

Prestressed pipe pile deflection meterSpecification

Accuracy ≤ 1% (FS), reading ± 1 word
2. Force and displacement display, with the smallest unit being 0.01KN and 1mm
3. AC power supply~220V ± 15% (50Hz)
4. Automatic zeroing
5. Operating environment temperature: normal temperature
6. Use environment humidity of 40% -90% (no condensation)
7. Use without strong magnetic fields or noise sources around
No peak display
Measurement: Displacement measurement within 1800mm. (The smallest display is 1mm)
When the force display unit ① is ≤ 20KN, the reading is 0.01KN
② When ≤ 200KN, the reading is 0.1KN
Load display zeroing, displacement display zeroing, zeroing
Maximum Display Scale: 1999
Storage environment: Temperature: -5 ℃ to+45 ℃
Humidity: 40% to 90% (without condensation)
Volume: 290mm wide x 120mm high x 265mm deep (including bracket and largest size)
Prestressed pipe pile deflection meterStandard configuration:
1. One large window display instrument and one power cord.
One 2.20KN and one 200KN tension sensor, two M36 suspension rings, two M24 suspension rings, and one 5-meter 4-core shielded signal wire.
One 3.1800mm displacement sensor, one sensor bracket, and one 5-meter 3-core shielded signal wire. One electronic stopwatch

In our actual pole inspection and testing process, based on the actual situation of the manufacturer, errors should be minimized as much as possible when testing the mechanical performance of the pole, meeting the inspection conditions, and avoiding errors in bending and deflection values. This affects our determination of the bending moment, standard bending moment, and allowable deflection value for bearing capacity testing.

The product meets the testing requirements for load, deflection, and displacement of cement rods in GB/T4623-2014 "Mechanical Test Methods for Circular Cement Products"; It also meets the audit requirements of State Grid and Southern Power Grid for a single certificate.