Pulse dust collector spray pipe, spray air bag

NegotiableUpdate on 07/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Each box of the pulse dust collector is equipped with a set of pulse dust collector spray pipes and spray air bags according to the size of the box. Each set of pulse blowback system mainly includes solenoid valves, pulse valves, spray pipes, etc.

Product Details

Pulse dust collector spray pipe、Spray air bag：

The cleaning of the pulse bag filter adopts compressed air pulse cleaning.
The bag filter adopts an online state dust cleaning method, and the dust cleaning function is achieved by PLC using differential pressure (fixed resistance), timing or manual functions to control the dust cleaning chamber (the chamber is not closed during online dust cleaning), starting the pulse blowing valve to blow, causing the filter bag to deform radially and shake off dust.
The ash cleaning system is designed reasonably, and the pulse valve operates flexibly and reliably; Before the equipment leaves the factory, the main components such as the dust cleaning system are pre assembled to ensure quality.
The use of Venturi tubes or similar structural components to guide compressed air helps to stabilize the direction of compressed airflow.
Each box is equipped with a pulse blowback system according to its size, which mainly includes solenoid valves, pulse valves, spray pipes, etc. oneSpray air bagThere are multiple pulse valves installed on top, each equipped with a spray pipe.
Spray air bag

The spray air bag is designed as a circular open cylinder structure, with a diameter of Ø 325mm or Ø 425. Generally, the pressure drop inside the air bag after pulse injection does not exceed 20% of the original storage pressure. The inlet pipe diameter of the airbag is DN65 to meet the requirements of air supply speed. Install a drain valve at the bottom of each airbag to periodically discharge the debris and impurities from the container outward. The spray bag is equipped with a safety valve to ensure safe operation. And equipped with a ground pressure gauge to timely regulate the pressure of the spray bag. Connect the spray bag and gas storage tank with a connecting pipe. After processing and production, the gas bag is continuously sprayed with compressed air to clean the internal welding slag. Only after ensuring that the inside of the gas bag is clean and dry can valves, pulse valves, etc. be installed. Install matching rain covers on pulse valves, gas storage tanks, etc. to prevent electromagnetic valves from being exposed to rain and moisture.

injection pipe

The short spray pipe serves to connect the spray bag and nozzle. Guide the compressed gas to achieve the desired cleaning effect by injecting compressed air into the box with sufficient force.