QBY-15 stainless steel pneumatic diaphragm pump

Characteristics and Overview of Stainless Steel Pneumatic Diaphragm Pump:

QBY stainless steel pneumatic diaphragm pumpPowered by compressed air, QBY is a type of volumetric pump that undergoes volume changes due to the reciprocating deformation of a diaphragm. Its performance parameters are similar to those of ARO pneumatic diaphragm pumps from Ingersoll Rand, and its working principle is similar to that of a plunger pump. Due to the characteristics of the diaphragm pump's working principle, QBY has the following features:

(1) Pneumatic diaphragm pump will not overheat: compressed air and electric motor are used as power, and during exhaust, it is a process of expansion and heat absorption. The temperature of the pneumatic pump decreases during operation, and no harmful gases are discharged.
(2) No electric sparks will be generated: Pneumatic diaphragm pumps do not use electricity as power and are grounded to prevent electrostatic sparks.
(3) It can be achieved through liquid containing particles: because it works in a volumetric manner and the inlet is a ball valve, it is not easily blocked.
(4) The shear force on logistics is extremely low: how to suck in and how to spit out during operation, so the agitation of materials is minimal, suitable for the transportation of unstable substances.
(5)QBYThe flow rate can be adjusted by installing a throttle valve at the material outlet.
(6) It has the function of self-priming.
(7) It can run empty without any danger.
(8) Can work underwater.
(9) The fluids that can be transported are extremely diverse, ranging from low viscosity to high viscosity, from corrosive to viscous.
(10) No complex control system, no cables, fuses, etc. (pneumatic diaphragm pump).
(11) Small size, light weight, and easy to move.
(12) It will not pollute the working environment due to dripping.
(13) The pump can always maintain high efficiency and will not decrease due to wear and tear.
(14) 100% energy utilization, when the outlet is closed, the pump automatically stops, and there will be no wear, overload, or heating during equipment movement. When the outlet is opened, the pump automatically starts up (pneumatic diaphragm pump).
(15) Without dynamic sealing, maintenance is simple and leakage is avoided, and there are no dead spots during operation.

QBY Technical Parameters:

When transporting fluids that are prone to sedimentation and freezing, when the pump is not running for a period of time, it is necessary to rinse the inside and outside of the pump with a suitable solvent before stopping to avoid blockage and damage.
If the pump needs to be stopped for several hours during operation, please cut off the compressed air.
The flow rate of the pneumatic diaphragm pump can be adjusted by regulating the pressure and flow rate of the compressed air. You can also adjust the flow rate of the feed to control it. Please do not use hoses or feed pipes with too small a diameter to avoid excessive suction resistance and blockage of the feed pipe.
It is recommended to install all shut-off valves at the compressed air inlet of the driving pump when feeding with positive pressure.
Please install the pump firmly to avoid damage from vibration during operation.