Quick connect electromagnetic pulse valve

ZM typeElectromagnetic Pulse ValveThe valve body and valve cover are made of aluminum alloy die-casting, and after surface treatment, they have good performance. The membrane and sealing gasket are vulcanized and compounded using a new process. The electromagnetic pilot head is composed of magnetic material and stainless steel magnetic isolation material, and the spring and fasteners are made of stainless steel material. The connecting pipe of the air distribution box (air bag) and the spray pipe of the dust collector are respectively inserted into the inlet and outlet of the valve, and the two end compression nuts are tightened for sealing. Suitable for cleaning various filter bags (round bags, flat bags, irregular bags, metal fiber bags), filter cartridges, ceramic tubes, and plastic fired plates and other filter elements.

working principle;
The electrical signal of the pulse injection control device causes the electromagnetic pulse valve armature to move backwards, the exhaust hole in the rear chamber of the valve opens, the rear chamber rapidly loses pressure, the diaphragm component moves backwards, compressed air is injected through the valve output port, and the electromagnetic pulse valve is in the "open" state;
The diaphragm divides the electromagnetic pulse valve into two chambers, front and rear. When compressed air is connected, it enters the rear chamber through the throttle hole. At this time, the pressure in the rear chamber presses the diaphragm component tightly against the output port of the valve, and the electromagnetic pulse valve is in the "closed" state;