Quotation for Double Plate Thermal Conductivity Tester

Quotation for Double Plate Thermal Conductivity TesterQuotation for Double Plate Thermal Conductivity TesterModel: M402180 Warehouse Number: M402180

Detailed information on the dual plate thermal conductivity tester (thermal protection plate method):

The M402180 dual plate thermal conductivity tester is based on the principle of unidirectional stable thermal conductivity. When the upper and lower surfaces of the sample are at different stable temperatures, the thermal flux passing through the heat transfer area of the sample and the temperature difference and thickness between the two surfaces of the sample are measured to calculate the thermal conductivity. Satisfied the high-precision testing requirements of the material testing research department for the thermal conductivity of materials. Fully automatic data collection, data processing, report printing, and data storage. The advantages of short measurement time, accurate data, good repeatability, and high degree of automation.

1、 Purpose:

This thermal conductivity tester mainly tests homogeneous plate-like materials such as plastic, rubber, glass, fiber, polystyrene board, extruded board, foam concrete, hollow glass, wooden board, and various insulation materials. It can also measure the thermal conductivity of various substances such as granular materials, bulk materials, and soft materials.

Applicable standards:

GB/T10294-2008 "Determination of steady-state thermal resistance and related characteristics of insulation materials";

GB/T3399-1982 "Test method for thermal conductivity of plastics - Thermal protection plate method";

Measurement of thermal conductivity of polyurethane rigid foam materials specified in GB/T10801.1-2002 Polystyrene Foam Plastics for Thermal Insulation;

GB ／ T10801.2-2002:<Extruded polystyrene foam for thermal insulation (xps)>. Measurement of thermal conductivity of extruded polystyrene foam as specified in;

GB/T3139-2005 "Test Method for Thermal Conductivity of Fiber Reinforced Plastics";

GB/T 17794-2008 Flexible foam Rubber Plastic Thermal Insulation Products;

2、 Technical indicators:

1. Thermal conductivity:

Measurement range: 0.001-3000 W/m.K.

Measurement accuracy: ± 2%, repeatability: ± 1%.

2. Measurement range of hot surface temperature: room temperature -150 ℃, temperature resolution: 0.01 ℃.

3. Cold face temperature measurement range: 0-60 ℃, temperature resolution: 0.01 ℃ (basic configuration).

(Users can choose between -10~60 ℃ and -30~60 ℃ according to their requirements).

4. Heating power of metering plate: 100W+1%

5. A fully computerized automatic detection and data processing system that can be compatible with general-purpose computers.

6. Power supply: 220V 50HZ.500W.

7. Sample size: 100 * 100 * (5-50) mm

200*200*（5-50）mm

300 * 300 * (5-50) mm (basic configuration)

600*600*（5-50）mm

Features:

★ Online temperature calibration: The calibration instrument is simple and fast, with an accuracy improvement of more than 3 times.

★ Large measurement range: range 0.001-3.00w/(m.k).

★ Multiple measurement types: In addition to measuring hard boards, various accessories from the company can be selected to measure a variety of te shu materials. For example: granular materials, bulk materials, soil, soft materials, liquids, etc.