Rack mounted lightning protection socket (PDU)

Installation method:

○ Installed at the front end of the protected equipment, the cumulative total power of the connected protected equipment must be less than 2000W
Simply insert the plug into the socket to use it normally
Please ensure that the L (live wire) and N (neutral wire) inside the front-end socket are connected to the socket in the correct way, with the N (neutral wire) socket on the left and the L (live wire) socket on the right. Do not connect them in reverse

Please ensure that the PE wire of the front-end socket is well connected to the ground. If it is not possible to ensure proper grounding, it is recommended to connect another lead wire to the main steel reinforcement to quickly discharge lightning current to the ground.

Installation precautions:

The lightning arrester does not require special maintenance. When the fault light of the lightning protection socket goes out, it indicates that the internal lightning protection components of the lightning protection socket are damaged, and the lightning protection socket should be replaced in a timely manner