Radar water level and flow rate integrated machine

Radar water level and flow rate integrated machineBy integrating radar detection and intelligent algorithms, high-frequency electromagnetic waves are emitted and reflected signals are analyzed to synchronously obtain water level height, water flow velocity, and instantaneous flow rate. Non contact measurement design avoids direct contact between equipment and water bodies, effectively resists sediment impact and sewage corrosion, and adapts to complex environments. The device is equipped with a built-in Doppler flow velocity calculation module and flow calculation formula, which can automatically correct water flow fluctuation errors and ensure reliable data. With high precision, easy deployment, and low power consumption, it is widely used in fields such as river monitoring, flood warning, urban drainage management, and ecological flow protection.

1、 Product Introduction

Our company's research and developmentRadar water level and flow rate integrated machineAdopting K-band planar microstrip array antenna, energy concentration and low power consumption; The instrument integrates functions such as vertical angle compensation, flow velocity averaging, signal strength detection, and serial communication control. The non-contact radar flow measurement system ensures that the equipment is not corroded by sewage or affected by sediment during speed measurement. The civil engineering is simple, less affected by water damage, easy to maintain, and ensures personnel safety. Not only can it be used for regular environmental monitoring, but it is also particularly suitable for undertaking urgent, difficult, dangerous and heavy observation tasks.

2、 Product Features

1. Non contact, safe, low loss, minimal maintenance, and not affected by sediment

2. Capable of measuring under high flow velocity conditions during flood periods

3. It has anti reverse connection and overvoltage protection functions

4. The system has low power consumption and is generally powered by solar energy to meet the needs of current measurement

5. Multiple interface modes, including both digital and analog interfaces, compatible with the standard Modbus RTU protocol for easy access to the system;

6. Equipped with wireless data transmission function (optional)

7. It can independently connect with the currently running automatic monitoring and reporting systems for urban water conditions, sewage, and environment

8. Wide speed measurement range, effective measurement distance up to 10m

9. Multiple triggering modes: cycle, trigger, manual, automatic

10. The installation is particularly simple, with very little civil engineering work

11. Fully waterproof design, suitable for outdoor use

3、 Technical parameters

4、 Product Structure Diagram

5、 Product installation diagram

The installation diagram is shown in the figure. On site installation can be carried out with the help of existing building foundations such as bridges and brackets, but it is necessary to ensure that the direction of the radar wave emitted by the flow meter is parallel to the direction of the water flow. The wave emitted by the flow meter is at a 45 ° angle to the water surface, and the default adjustment angle at the factory is 45 °

6、 Installation precautions

1. Installation requires selecting a stable flow state, on a straight channel, away from the gate outlet, and at the channel bend position

2. The installation height should be controlled within 5 meters as much as possible (the closer the distance, the stronger the measurement signal and the more reliable the data)

3. If the water flow rate is below 0.25 and the water ripple is small, there is feasibility for unstable measurement